Fired up the old 76 plow bronco today, its been sitting all summer and fired right up after a couple pumps of the pedal. It'll be getting a break this winter since I bought a 79 to take it's place.
I need to do a post, there's videos and pictures spread around the interwebs. They're still editing the Rubicon video.Great to hear it fired right up, even after being ignored for summer and fall while you were out galivanting!
So where are the pics of your epic journey to the southland? Is there a thread I missed somewhere?
Paul
Posted PaulThanks. Can't wait to see more.
Paul
That was "The Post of the Year" brother... Awesome pics. Thanks for taking the time to put that all toghether!!!Posted Paul
Broken Bronco Garage has a U-Tube video up with some of your travels, but I haven't watched it yet...I need to do a post, there's videos and pictures spread around the interwebs. They're still editing the Rubicon video.
Its just the Nevada portion so far, he's still editing the Rubicon stuff.Broken Bronco Garage has a U-Tube video up with some of your travels, but I haven't watched it yet...
How was it? Did you have to do any frame notching?Just finished explorer short dress on my 73
Running a 79 high pinion go for 7, get as much caster as you can, the driveshaft won't suffer at all with the high pinion housing.Old 76 F250 low pinion axle out, new ball joints (upper and lower) are in and the old passenger knuckle (with the high steer arm) is installed on the replacement 79 Bronco axle. Duff extended long travel radius arms removed, so when I bolt the radius arms on the new axle I can make sure the radius arm ends are even. And help prevent any chance of Bronco lean, lke it really matters on ol Sketchy anyway.
Now working/have a C bushing issue/question. I finially just seen that it HAD 4* C bushings, that are totally SHOT. So go back with new 4* or can I use 2* (already on hand) or go to 7*? Survey says?
Couldn't avoid that with a 1" body lift or a W/H cowl hood...???Had to cut my hood the clear the motor. I tried all I could to avoid it, but at the end of the day it had to happen.
I already did the 1” body lift. I didn’t want to go with another hood because mine still has the 1970’s pin stripes like the rest of the body.Couldn't avoid that with a 1" body lift or a W/H cowl hood...???






