• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Great to hear it fired right up, even after being ignored for summer and fall while you were out galivanting!;)
So where are the pics of your epic journey to the southland? Is there a thread I missed somewhere?

Paul
 

399strokerEB

Contributor
Bronco Guru
Joined
Jun 23, 2010
Messages
1,733
Loc.
Wasilla, AK
Great to hear it fired right up, even after being ignored for summer and fall while you were out galivanting!;)
So where are the pics of your epic journey to the southland? Is there a thread I missed somewhere?

Paul
I need to do a post, there's videos and pictures spread around the interwebs. They're still editing the Rubicon video.
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
LOOKS like I still have a few more days before bed time...27 when I left this morning, brrrrrrrr
00-NfmewEdBZpaPKHQAw15duo37JUqllZL3YGr4_whos6aEGzsyO6Pd-uY5GyhfI8dsldMTLfbtJ__wYVBQ_4iTow.jpg
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Old 76 F250 low pinion axle out, new ball joints (upper and lower) are in and the old passenger knuckle (with the high steer arm) is installed on the replacement 79 Bronco axle. Duff extended long travel radius arms removed, so when I bolt the radius arms on the new axle I can make sure the radius arm ends are even. And help prevent any chance of Bronco lean, lke it really matters on ol Sketchy anyway.

Now working/have a C bushing issue/question. I finially just seen that it HAD 4* C bushings, that are totally SHOT. So go back with new 4* or can I use 2* (already on hand) or go to 7*? Survey says?
 

Attachments

  • Screenshot (1090).png
    Screenshot (1090).png
    1.3 MB · Views: 30
  • Screenshot (1091).png
    Screenshot (1091).png
    940.6 KB · Views: 28

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Well, I would love to sell you another set of fours, but I’m firmly in the “run what ya brung” camp.
Or the “already have it on hand” method of decision making. 😁😉
I feel like, for your intended use of zero street, and only trail, losing a couple of degrees of positive caster is not the end of the world.
Given the at least 6° built into the 79 front end, the 4° built-in to the Duff arms, plus the 2° of C-bushing, even with the 5 1/2 inch lift you should have sufficient caster for trail running.
If Sketchy spent more time on the street, I’d probably say go with the 7’s and check your pinion angle.
But as it sits, why not just put it together and see what the 2’s do for you both in pinion angle and caster.

For the record, earlier I had suggested to Rich to put it out here to everybody else (copping out!).
But I thought I’d throw my pinion opinion into the mix anyway.
 

1969miller

Contributor
Sr. Member
Joined
Jan 18, 2022
Messages
371
Loc.
Elk Grove
Old 76 F250 low pinion axle out, new ball joints (upper and lower) are in and the old passenger knuckle (with the high steer arm) is installed on the replacement 79 Bronco axle. Duff extended long travel radius arms removed, so when I bolt the radius arms on the new axle I can make sure the radius arm ends are even. And help prevent any chance of Bronco lean, lke it really matters on ol Sketchy anyway.

Now working/have a C bushing issue/question. I finially just seen that it HAD 4* C bushings, that are totally SHOT. So go back with new 4* or can I use 2* (already on hand) or go to 7*? Survey says?
Running a 79 high pinion go for 7, get as much caster as you can, the driveshaft won't suffer at all with the high pinion housing.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
It's "street" time is on a trailer to a semi local off road park 20 min or 1.5 hrs away. Paul thanks for the covering all the degree bases again. The 8 year old grandson likes wheeling it, so does his dad (my SIL) that originially bought it over in Oklahoma. Since it is kept and my place and I alwasy end up working on it so much anyway, that when he decided to sell it, I just bought it.

Thanks for the advise 1969miller. It has a square tubing front DS anyway.
 

Attachments

  • bco3.jpg
    bco3.jpg
    153.9 KB · Views: 40
  • bco2.jpg
    bco2.jpg
    152 KB · Views: 41
  • 29.jpg
    29.jpg
    144.1 KB · Views: 38
  • 35.jpg
    35.jpg
    219.8 KB · Views: 41
  • 19.jpg
    19.jpg
    203.5 KB · Views: 38
  • 12.jpeg
    12.jpeg
    332.4 KB · Views: 47
  • 3.jpg
    3.jpg
    226.6 KB · Views: 44

Hopstr

Contributor
Full Member
Joined
Feb 26, 2012
Messages
207
Had to cut my hood the clear the motor. I tried all I could to avoid it, but at the end of the day it had to happen.
 

Attachments

  • IMG_0465.jpeg
    IMG_0465.jpeg
    111.9 KB · Views: 54
  • IMG_0664.jpeg
    IMG_0664.jpeg
    281.7 KB · Views: 61
  • IMG_0670.jpeg
    IMG_0670.jpeg
    116.4 KB · Views: 61
  • IMG_0671.jpeg
    IMG_0671.jpeg
    79.2 KB · Views: 58

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
Had to cut my hood the clear the motor. I tried all I could to avoid it, but at the end of the day it had to happen.
Couldn't avoid that with a 1" body lift or a W/H cowl hood...???
 
Last edited:
Top