• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

track bar drop bracket or not

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
just finish putting the front end back together after rotating the knuckles. i was looking at the drag link and track bar and maybe there not close enough to perallel. i have a drop bracket for the track bar, do yall think it would be need. ive got a 3 1/2 lift and the delphi box.
 

Attachments

  • trackbar.jpg
    trackbar.jpg
    85.8 KB · Views: 201

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I think it would help. A riser welded to the axle would be more durable than a drop bracket though.
 

Nobody

Bronco Guru
Joined
Feb 15, 2005
Messages
1,215
Loc.
Stanwood
Agreed, drop brackets are a future point of failure. The riser is the way to go. Stay away from drop pitman arms too.
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
I wish I had seen this and ask sooner. I just powder coated the axle. Is there a problem using the drop bracket? I don't do much off road
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
Is the drop bracket failure due to no support on the back side? Could a brace be welded in to strengthen it.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
The drop bracket puts more stress on the frame in that area because of the increased leverage. Without serious off-roading or a front locker you'll be fine with it.
 

Deano

Bronco Guru
Joined
Jan 9, 2010
Messages
1,183
So is this where a tie rod over would be the ticket?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
It's definitely one possibility. And one of the reasons some people do a tie-rod over.
But it's not a guarantee of matching angles either, so you might still have to do both the TRO and the trackbar bracket sometimes. And even then, sometimes nothing off-the-shelf matches and you have to tweak things.
A new hole drilled into a drop bracket for instance, or using a different hole in a riser than would be normal. Or an end-user drilled hole there too.
Just no way to tell usually (in lieu of book geometry that is) without laying it out first, then tweaking for a match.

And if you're going to forgo a dropped pitman arm with a 3.5" lift, it's almost a necessity.
The OP's stuff is an interesting mix. It's probably because of his different steering box that his draglink and trackbar no longer match angle-wise.

Either way though, with 3.5" of lift and no correction, and even with the slightly lower draglink, the angles are steeper than is normal, and likely to produce more bumpsteer and vague steering feel than would be the case had they been at shallower angles.

Paul
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Been running a drop t-bar bracket and drop pitman arm for 16 plus years on my rig with NO issues at all.

Agree a riser is more durable when doing serious off-roading but for the average to above average rig, the drop will be more than fine.

Tim
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
Ok. Going with the drop bracket. Seeing as how it already laying on the shelf.
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
I got my "dropped" track arm from JBG that prevents me from using a weld/ bolt on part. Plus I got a dropped pitman arm. I feel that a smaller angle the better, but both need to be parallel to one another. I've always read if you have a 3.5 susp lift or greater these two items must be changed to keep the geometry correct.
 

Attachments

  • image.jpg
    image.jpg
    205.5 KB · Views: 90

motoman

Bronco Guru
Joined
Jan 29, 2002
Messages
1,729
Loc.
Phoenix, AZ
You can get away with a drop bracket just do a little bracing or spread the load at the top of the bracket. These usually fail as the top of the drop bracket cracks the frame. We spread the load to a wider area on Steve's and it does the job! Let me find the pictures...........

ah... found the thread....

http://classicbroncos.com/forums/showthread.php?t=158544

Allenfahey did the fix like this.... perfect example

attachment.php
 
OP
OP
wesleydax

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
i got the bracket put on and have some options im kicking around for bracing it. i dont run it hard so shouldnt need to be bullet proof. if youve got pics that would be great
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
...I've always read if you have a 3.5 susp lift or greater these two items must be changed to keep the geometry correct.

Mostly correct yes, but like all things Bronco, the correct phrase is: "Mostly, maybe, but not always" when it comes to the different years and different mods owners have made.
Coincidentally yours just happens to be one of the ones that might or might not need both.
As you probably know, the '76 and '77's had a larger trackbar mount right from the factory, so to use a drop bracket or riser can depend on what other mods you make.
Leaving the original "Y" system like you've done, you might need both like you said. But when converting from the original Inverted-Y to one of the many Inverted-T styles (which many do when lifting), you sometimes can't use a drop bracket. If you do you could be mismatched in the other direction.
A friend has a '77 with custom "T" tie-rod setup and a slightly less dropped pitman arm than yours and the angles are perfect without the drop bracket.

So as always... There's no one-answer-fits-all for Broncos. More of an "It depends" answer. Based on what you have and what else you do with it.

Paul
 
Top