• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Picked up a 97 Explorer harness, ordered some replacement plugs that were damaged on it. Re-pinned the ECU plug for 96 Explorer EGR. (Thanks Garry)
Don't have anything to put it in yet, don't have a motor, and not sure what transmission to put behind it yet. (leaning towards a 5-spd) It will be ready for future duty ;)
 

Attachments

  • 20261113_102558[1].jpg
    20261113_102558[1].jpg
    230.1 KB · Views: 32

skrit

Contributor
Bull City Bronco
Joined
Apr 24, 2006
Messages
509
Loc.
Durham
Found a BC Broncos part I bought from a while ago hidden in a parts bin. Figured out what it was...a power steering filter. Modded a $6 Home Depot gate stop to mount it to my $30 Optima style battery tray and cheap Walmart Everstart Maxx Group 78 battery. Installed a Hayden fluid cooler on the front of the radiator for the PS and plumbed it up.
1000023371.jpg

1000023369.jpg

Just waiting on my 6AN adapter for the 4x4x2 high pressure port to finish the PS/HB plumbing.
1000023372.jpg

Next up..battery wiring. GM OEM style side mount battery cables, extended brass terminal bolts (so that I can attach jumper/trickle charge cables) and a power/ground distribution block.
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Great to hear it fired right up, even after being ignored for summer and fall while you were out galivanting!;)
So where are the pics of your epic journey to the southland? Is there a thread I missed somewhere?

Paul
 

399strokerEB

Contributor
Bronco Guru
Joined
Jun 23, 2010
Messages
1,733
Loc.
Wasilla, AK
Great to hear it fired right up, even after being ignored for summer and fall while you were out galivanting!;)
So where are the pics of your epic journey to the southland? Is there a thread I missed somewhere?

Paul
I need to do a post, there's videos and pictures spread around the interwebs. They're still editing the Rubicon video.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Old 76 F250 low pinion axle out, new ball joints (upper and lower) are in and the old passenger knuckle (with the high steer arm) is installed on the replacement 79 Bronco axle. Duff extended long travel radius arms removed, so when I bolt the radius arms on the new axle I can make sure the radius arm ends are even. And help prevent any chance of Bronco lean, lke it really matters on ol Sketchy anyway.

Now working/have a C bushing issue/question. I finially just seen that it HAD 4* C bushings, that are totally SHOT. So go back with new 4* or can I use 2* (already on hand) or go to 7*? Survey says?
 

Attachments

  • Screenshot (1090).png
    Screenshot (1090).png
    1.3 MB · Views: 29
  • Screenshot (1091).png
    Screenshot (1091).png
    940.6 KB · Views: 27

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Well, I would love to sell you another set of fours, but I’m firmly in the “run what ya brung” camp.
Or the “already have it on hand” method of decision making. 😁😉
I feel like, for your intended use of zero street, and only trail, losing a couple of degrees of positive caster is not the end of the world.
Given the at least 6° built into the 79 front end, the 4° built-in to the Duff arms, plus the 2° of C-bushing, even with the 5 1/2 inch lift you should have sufficient caster for trail running.
If Sketchy spent more time on the street, I’d probably say go with the 7’s and check your pinion angle.
But as it sits, why not just put it together and see what the 2’s do for you both in pinion angle and caster.

For the record, earlier I had suggested to Rich to put it out here to everybody else (copping out!).
But I thought I’d throw my pinion opinion into the mix anyway.
 

1969miller

Contributor
Sr. Member
Joined
Jan 18, 2022
Messages
371
Loc.
Elk Grove
Old 76 F250 low pinion axle out, new ball joints (upper and lower) are in and the old passenger knuckle (with the high steer arm) is installed on the replacement 79 Bronco axle. Duff extended long travel radius arms removed, so when I bolt the radius arms on the new axle I can make sure the radius arm ends are even. And help prevent any chance of Bronco lean, lke it really matters on ol Sketchy anyway.

Now working/have a C bushing issue/question. I finially just seen that it HAD 4* C bushings, that are totally SHOT. So go back with new 4* or can I use 2* (already on hand) or go to 7*? Survey says?
Running a 79 high pinion go for 7, get as much caster as you can, the driveshaft won't suffer at all with the high pinion housing.
 
Top