• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Junkyard turbo

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
anyone installed a junkyard turbo on their engine? any suggestions for donor vehicles or other setup requirements?
 

Synds9

Full Member
Joined
Nov 10, 2003
Messages
315
Loc.
San Diego, CA
you're looking for two thunderbird coupes i believe an '85 and a '86. you'll need a set of shorty headers, turn them upside down, and put them on opposite sides and run one turbo on each side... waaalaaaa twin turbo 302. type that into google. ;)
 
OP
OP
lonesouth

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
I'm actually going to do this to a 170 I-6, so i suppose i'll just get one of the turbos, or get both and run them sequentially. I'll post pics as they come available. Thanks for the info.
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
37,076
Try looking here for info
http://www.turbomustangs.com/forums/
Basic junkyard shopping consists of finding a donor engine of about the right displacement and makes the HP you want to make and use that. For twin turbo, get 2 matching turbos off of engines half the size of yours.
Too big of a turbo will be worthless because your exhaust will never impart enough energy to spool up your used dump truck turbo.
Power stroke turbos apparently work good for singel turbo applications.
Turbo coupe turbos work good for twin turbo builds.
For blowing up the 170, I would shop for a chrysler 2.5L turbo, tha should be about the right size.
When you get done with that you can build one of these.
 

Attachments

  • carpet3.jpg
    carpet3.jpg
    61.2 KB · Views: 84
  • seat2.jpg
    seat2.jpg
    57.3 KB · Views: 83
  • p1010031.jpg
    p1010031.jpg
    64.1 KB · Views: 83
  • 7.jpg
    7.jpg
    42.1 KB · Views: 81

Lttrbox

Sr. Member
Joined
Sep 29, 2002
Messages
593
Loc.
IF
Okay, I give. Is that a propane turbine driven turbo boost Huh. ;D ;D Does it work. Lets a movie when ready, that atta be a hoot. ;D
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
37,076
OK, it is a converted junkyard catapiller diesel turbo converted into a jet engine that runs on propane. I just put it on the first light weight rolling chassis I got my hands on, the 3wheeler with a bad engine.

The engine has ran on a test stand, but not since I mounted it on the 3wheeler. Total investment is only time, NO $$$!! The bad part is that the free bottle of propane is now empty, I will have to spend a few bucks and have it filled.
 
Top