Search results

This and you could grab an twist at input of steering box and watch when pitman arm starts to move should be almost instantly,

absolutly in california this would fail visual would need a CARB EO#,, same with sniper .. and pro flo 4,,,,,, unless someone at a referree inspection oked it and assigned a referree emissions label, I've seen some questionable approvals from referee labels over the years ,, ,,,, But in...

Yep 96 for passenger cars 98 for light duty trucks ,, heavy duty is mostly obd2 but not all had a 2000 f350’that was in and was obd2 exempt,, 2016 was a another big year in the program new machine DAD ( data acquisition device) 2000’and newer cars no more tailpipe emission testing just visual...

71 across the board would have evap part of the 1970’clean air act.. and evap systems continued to evolve throughout the 70’s into the 80’s’ to meet new standards , thenn in mid late 90’s again evap evolved again as well as obd2 which made new possibilities in fuel management and enhanced...

Early 70’s 351w heads would have stud mounted rocker arms ,, in 77 maybe they went to pedestal rockers like in your picture as well as combustion chamber size increase to 69 cc , also valve size decreased in that time frame,, ,, post up the casting #s

yes 10 years ago the 7 degree taper was appropiate ,, as well as 30 years ago when we were doing GM TRE and DOM tubing conversions, post some pictures ..how deep does the TRE stud drop into the knuckle currently ?.

New Add bookmark #61 Odyssey is $429 for a 34/78 one website showed them permanently out of stock in this size. summit shows more then 10 in stock

Kentrol made fiberglass bodies way back 35+ years ago.. maybe even more recent?

If bench bleeding not sure of your process but when you think when your done ,, you could block both ports if you have the plastic screw in plugs or I just cover them with finger tips and mc clamp in a vise use a screw driver and push in on the plunger it should lock up at 1/8 . 3/16 of an...

the dual port was a flop.. they also have one the same but not its the 360 its technically a single plane with a divider that is partially cut away in the secondary throttle plate positions, looks very simular to the one you posted,,, I run the offy 360 351w manifold that I modified to to run...

So dug out manifolds in storage for pics and some measurements 69 intake C90E-9425-E next to performer 351w 2181 manifold ,, the performer will be 3/8 inch taller I will also note that the carburetor is also mounted 1 1/4 inches farther forward on the Edelbrock manifold ... If you place a...

if you cut and paste that part # there is one on ebay for sale in Maryland , https://www.ebay.com/itm/206068732153?mkcid=1&mkrid=711-53200-19255-0&siteid=0&customid=link&campid=5335857059&toolid=20001&mkevt=1

E6TE-9425-CB 86-87 trucks as well as marine use .E4TE-9425-BB 84-85 Trucks C90E-9425-E 69 Mustangs and cougars C90X-9425-A Sold through muscle performance, These are the part numbers for factory 4V 351w manifolds ... Note you will also have to run the PCV /spacer plate ,if you try an...

E6TE-9425-CB 86-87 trucks as well as marine use .E4TE-9425-BB 84-85 Trucks C90E-9425-E 69 Mustangs and cougars C90X-9425-A Sold through muscle performance, These are the part numbers for factory 4V 351w manifolds ... Note you will also have to run the PCV /spacer plate ,if you try an...

cross caster favoring the right side would be ideal, most vehicles specs are geared that way , But would I chase those #’s probably not,,

69- 70 mustang /cougar are low , but they will have 16 bolts one extra at each water port an L shaped water passages ,, , I’ve used L shaped water passages heads with later style aftermarket intakes but not the other way square port heads and L shaped manifold?

So your thread title had me thinking a little different , I’ve thought about this before and may dig into it ,,, SO with an electric fan you could set it up to run after shut down either ambient temp switch and or some kind of timer,,, , within a minute or so the radiator core should pretty...

they appear to Reid flat tops . but that picture you posted they look slightly different but maybe an illusion ... WH shows them in pairs ,and are 6 bolt spindle , reid site has the 5 bolt, wonder if you contact them they can drill/taper in what ever configuration you want ? AS far as HLC...

Maybe Barnes offroad

I don't run a stabilizer,, but have in the past but not on the current set up,, As far as mounting on upper rod end , that is how the picture Oldtimer posted from the duff site,, shows it,, , when I looked on there site I only found a picture with ther older style white damper pictured ...