• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    AZ Need steel PVC tube for '77

    Steel PVC tube for '77 is 3/8" factory bent to insert into the 2150 carb spacer and connects to PVC in oil filler cap.
  2. J

    FJ40 wiper transplant

    Has anyone installed early '70s Landcruiser electric wipers that are mounted over the windshield on an EB? They have one motor and a sliding cable to move the second wiper. So they move together like the Bronco electrics but take up a lot less room. The early visors and head liner would work...
  3. J

    Stock '69 289 throttle linkage?

    Went to reinstall the strange assembly Ford put on early 289s. I can't make any sense of it, but I think it's all there. Why use such a complicated series levers, cranks,and rods? On later V8s, Ford put one rod from the bell crank to the throttle lever on the carb. They must have had a reason to...
  4. J

    Hard starting after heat soak.

    Holleys seen to have more problems than other carbs with heat soak boiling the gas in the float bowls.The only fix that has worked for me is an AFB in the summer. The factory ran tubes from the float bowls to the charcoal canister in the '80s. Does this help? I've tried thick heat insulating...
  5. J

    Correct vapor control plumbing for a 77'?

    My Bronco has a 3/4" corrugated aluminum tube connecting the charcoal canister to the air cleaner and a vacuum hose from the canister to the tanks. The original 2150 carb had a vent hose nipple, but I don't remember a hose to the canister. The 77' truck shop manual doesn't show one. Difficult...
  6. J

    What makes a Truck Avenger worth the $

    When looking a little deeper at what it is that's unique about the Truck Avenger I only know of a check valve in the metering block that controls fuel that would otherwise splash out of the booster venturi. The looped vent tube,spring loaded needle & seat.and annular discharge booster veturis...
  7. J

    Best body mount rubber or urethane?

    No truck I know of comes with urethane body mounts from the factory and rubber compounds have improved. So why change? The original rubber squashed on the front end of one of the three Broncos I've owned, and I think that was oil contamination. Otherwise they held up well and isolated the body...
  8. J

    Edelbrock Performer fuel filter?

    Most of us know that the AFB is not the most Ford friendly carb. We also know they work for years with little maintenance. So I'm keeping it at least for daily driving. The fuel inlet is usually on the wrong side for Fords and at the wrong end (the back). A sanitary plumbing job with an inline...
  9. J

    How to determine best spark timing?

    Many of the threads looking to cure overheating result in posts asking "Is your timing set to spec?". All the engine builders I've discussed ignition timing with, told me every engine is different. Even engines that rolled off the same assembly line built to the same specs. Most early Broncos...
  10. J

    Who sells lower door carpet-cover?

    I know I've seen lower door carpet covering and a vinyl molding with a map pocket that covers the lower portion of the door. Now I can find neither. The bottom of the door gets dinged up by the seat belt buckle and kicked regularly. I want to protect this this area and I like the idea of a map...
  11. J

    Poly balls that fit inside frint coils?

    Anyone remember the bottoming poly balls that were sold 30-40yrs. ago? I believe they were called Charlie Hega suspension balls. Many Baja racers used them and they were well thought of. They helped avoid front axle damage when high speed Broncos got airborne.
  12. J

    LED dash light bar

    Rebuilt my in dash light bars after some of the tiny bulbs burned out. I found that the heat from these bulbs was melting the plastic boxes. After seeing the instrument illumination LEDs at BCBroncos, I wondered if their LED snake lights could replace those little incandescent bulbs in the light...
  13. J

    Body lift or not?

    If stock bumpers,fan shroud,etc.are used;how much can the body be lifted before the space between the top of the frame-bumper and the bottom of the grill looks a little odd? Before the rubber discs on my 68 deteriorated this space was only about 3/16". Now the grill is touching the frame. I want...
  14. J

    Where to best use air dams for cooling?

    After reading many posts dealing with over heating issues,I've seen several theories on the causes of over heating.Some address high speed highway driving others address stop and go traffic conditions.Many claim air dams that limit recirculation of hot air back into the front of the radiator are...
  15. J

    How to mount throttle position sensor

    After checking with Baumann to be sure I can do a 4R70W swap,I'm not sure how to best mount a throttle positioning sensor on a Holley or AFB. In fact the only carb mounting system I can find is a choke housing type that appears to protrude into the stock air cleaner. The Holley mount is the only...
  16. J

    Stock ride height?

    Before buying springs it would be helpful to have a definition of what is "stock" ride height and were does someone measure it?Both EBs I purchased new and the used one all had 4900lb.GVW packages that have a nose down stance with the front 2 1/2"+ lower than the rear.This is an effort to raise...
  17. J

    Extreme cooling fix?

    After 40 yrs. and three EBs I still have no answer for a hot running engine when the Az. summer brings 110 degrees or more.The engine temp starts to climb over the thermostat setting when the air gets over 100.With an aluminum radiator and all normal over heating causes (lean mixture,over...
  18. J

    best hwy cruising rpm with a 351

    With all the AOD and axle ratio options available,what is the ideal RPM for a 351W to move an EB on 31x1050 tires at highway speeds?This seems the best ,starting point in considering an AOD transplant.The C4 and 3.50 axle yields about 2500 RPM at 65MPH.My driving impression is that a higher gear...
Top