• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Best Quality Duraspark Module Available

    Ford dealerships tell me they can't offer actual Ford modules made in the USA. Those from the after market have a poor reputation. The You Pull It I went to yesterday had at least a dozen that were all after market. Only 2 of them had any type of brand name. The others were a complete crap...
  2. J

    Need source for wiper arm conversion rivets

    I've read many treads about the Cherokee wiper arm conversion, but none reveal where new SS rivets can be purchased. They all do explain that the arms need to be shortened and how to do it. Most just say they replaced the rivet with a new SS one. These aren't available at Ace Hardware. A small...
  3. J

    Hughes fuel miser converters?

    When my C4 needs another rebuild, I may try one of these 1200 RPM stall speed converters. Has anyone used one?
  4. J

    Alaska off Road Warriors ; on History Channel

    The History Channel is advertising a new show that features 4x4 teams competing in an expedition type cross country run. I didn't see any EBs, but I like the idea of an event that embodies what off roading is really all about.
  5. J

    No Early Broncos in Moab?

    Visited relatives in Colorado, last week, taking me through Moab twice. With thousands of quads, Jeeps, Harleys, and dirt bikes I saw no EBs. When passing through there in the '70s and again in the '90s I saw plenty. It seemed hard to believe.
  6. J

    '77 vapor emission plumbing

    When new, my '77 had a 2150 carb with a vent nipple on top of the float bowl. The vent was capped off, as was one of the small nipples on the charcoal canister. Since it was just federally emission compliant, I always wondered if Cal. emission rules would have required the float bowl vent to...
  7. J

    Correct routing of heated choke tubes

    I'd love to see a photo of either NOS or restored hot air tubes between the stock exhaust manifold and a Ford 2100-2150 carb. I came across a very clean 302 exhaust manifold with heated and fresh air tubes at the U-Pull it. Everything is clean and rust free but some of the "customers" seem to...
  8. J

    Junk Yard source for interval wiper switch?

    Title pretty much says it. The ones I've seen offered by the venders are described as used. I know where to find any Ford truck made in the late '70s, but I don't know what yr. and model had the interval wiper switch that works in an EB.
  9. J

    EB set up for touring and expedition?

    I'm retired and want to travel the country. In the early eighties I took several trips with my wife that were 4000-5000 mi. each in our '77. We built a deck over the wheel wells that folded out to the bottom of the passenger seat that was fold and tumbled. We slept on the deck and packed...
  10. J

    Stainless screws for locking hut ring?

    The screw heads that secure the chrome plated rings on the locking hubs are rusty eye sores. There's no protection from the elements, so I'm thinking of trying stainless ones. The problem I'm told, is metal incompatibility. The nut and bolt supplier says stainless screws may seize in non...
  11. J

    Can Rebuilders Reduce Steering Gear Slop?

    A power steering gear rebuilder in Phx. that only works through parts stores, claims they can tighten the feel significantly. I'm told they do this by removing the Schrader Valve, not sure on the spelling. Since I can't talk to them directly, as that's their agreement with the parts store, I...
  12. J

    Time to summerize the cooling system

    For those in northern climates it's recommended to winterize your vehicle. In hotter places like Az. even the weakest cooling system is OK in the winter. When it's over 100 or 110 or even 120 things get stressed. Does anyone have a check list of summerizing preparations for us desert rats?
  13. J

    Need a '73-'75 LH wheel tub

    I'm doing a restoration on my '77. The problem is, I want to keep the power brake booster, original steering shaft with the rag joint while using the F250 long travel shock mount. The '76-'77 wont work with the long travel shock mount. The original was mangled in a collision so I need a new...
  14. J

    Need a source for '78-'79 body mounts

    I crawled under a '78 in the junk yard while pulling the steering column, and noticed the body mount pads were about 7/8" thick and larger in diameter than those for EBs. They would give me the 1/4" to 1/2" body lift I'm looking for, while resisting deformation over time. The problem is I can't...
  15. J

    Durable OE Swing Away tire carrier?

    The swing away spare tire carrier was popular option. I always liked the look and room behind the rear seat. The problem is that after a short time, they rattle. You can replace the pivot pin bushings, the stainless latch guard,and the rubber bumper in the latch and the rattle soon comes back...
  16. J

    Early or late core support?

    My '77 core support was badly mangled in a front end collision. WH reproduction is the most accurate late version. It looks identicle to the'77. I have a clean rust free '68 core support but I can't see how the Saginaw power steering gear can fit behind it. The radiator opening is about 4"...
  17. J

    Good pull through electric fuel pump?

    Research on classic car sites has produced a possible cure for dried out carburetors on non daily drivers. Some have mounted an electric pump upstream from the mechanical OE pump. They put a switch in a direct battery power supply to the pump to fill the float bowl or bowls. After a few seconds...
  18. J

    When did steel valve cover gaskets appear?

    Ford began using heavy gauge steel valve covers on small blocks sometime in the mid '80s. Does anyone remember what years? The steel-rubber re-usable valve cover gaskets were introduced at the same time. The 5.0 4bbl Mustang GTs had finned aluminum valve covers but 5.8 HO 4bbl trucks including...
  19. J

    Has anyone done a '78 steering shaft swap?

    The '78 shaft will need an EB bracket to secure it to the dash. It looks like my '77 otherwise. The columns are both 2 1/4" in diameter and the shafts are nearly identical. If I position the shaft to place the shift arm in the same position as the '77 to maintain the C4 selector geometry will...
  20. J

    '78 to '77 steering shaft swap?

    Got a '78 Bronco auto trans steering column at U Pull It for $45 today and wondering what hurdles I'll have to jump? The bottom end of the '78 is splined but I don't know if the rag joint on the '77 will fit these splines. The '78 came with a U joint on the splines that looks like the U joint at...
Top