• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    What is a Luber?

    Taken out of context, it would seem to be someone or something that lubes or lubricates. Within the context of this sight, I think it has something to do with a lack of wheel well cut outs. The urban dictionary says its an ugly person. The Classic Broncos forum definition is difficult to...
  2. J

    '78-'79 Bronco column in an EB?

    While window shopping at the U Pull It, I found a '78 that still has a steering column with the lower portion of smaller diameter like EBs. The shift collar is the '80s style large diameter. The steering wheel is the far more common 15" thick rim that I prefer. Will the '78-'79 column work in...
  3. J

    Are all Dana 44 bearings the same?

    Just got a set of Dana-Spicer locking hubs for a C20 4x4. The wheel bearings were included. If they're the same as the Ford bearings I want to save them. The hubs are the same, except for the blue plastic knobs.
  4. J

    New or Restored Engine Photos?

    I've done many searches and can find no accurate photos of EB engine compartments, as new. For those of us doing restorations, photos of the desired end product are needed. We often hear from owners new to EBs, who are trying to make sense of the mess left by a previous owner. If there's someone...
  5. J

    Better or Best Locking Hubs?

    Several venders I asked about replacing my locking hubs advised Warn Premiums, Mile Markers,and others. They all seem to do the same job, in the same way. Some have what looks like aluminum splines. They may be stainless, or hard chrome but I can't tell. The salesman at the off road store was...
  6. J

    How do I install a '77 axel on a '68 frame?

    I have straight '68 frame (and rust free tub) that I'm turning into a '77 in every way, except the '68 title. The '77 frame has been in 2 wrecks and is bent to the right. I have both frames but only one of most other major parts. When comparing the frames I can see one difference. The track bar...
  7. J

    What steering wheel looks right on EBs?

    I've gone through several OE type steering wheels, because in Az. they crack after a few years and cost big $ to replace. Both the '66-'73 and the '74-'77 types dry out and gaps appear. With power steering I don't need the 17" diameter so a 15" wheel like Ford used in '80 trucks would be better...
  8. J

    Any harm in cooler thermostats?

    Engine builders tell me the newer engines, that were also emission oriented, were designed with clearances that like to run at 195°. They say cooler thermostats increase cylinder wall wear. I ignored this when I had overheating problems and went with a cooler thermostat. The overheating turned...
  9. J

    What do I watch for in drilling a phonelic spacer

    Need to put a PVC nipple on a 1" phenolic spacer. It's a 4 hole type that I want to keep the carb cool and use the '77 front PVC tube that was original equipment. I'd like to have at least the look of OE plumbing, since I still have it all. The phenolic material looks hard and brittle so it may...
  10. J

    Surface treatment for enclosed spaces?

    Starting a frame off. I'm finding plenty of steel surfaces that were never painted so I'd like to paint or coat them so humidity or water that gets into places it's not supposed to, doesn't rust these surfaces. Most of these places have some light surface rust that can't be cleaned out without...
  11. J

    Warn Hubs for a restoration?

    The Warn standard locking hubs look nearly identical to the Dana-Spicers that Ford used as OE. Will the the red actuator knob from the original hub fit in the Warn standard type locking hub, that otherwise looks like the Dana? Parts for the Dana are unavailable new, and the O-rings need to be...
  12. J

    Found a 4100 carb what do I need to know?

    Bought a 4100 with 1.08 venturis on Ebey, that looks too be a good one. I'll rebuild it. But it's been 30 yrs. since I worked on a 2100 or 4100, and they were low mileage and only a few years old. This ones 45 yrs. old and I don't know what parts are original, so things like idle feed...
  13. J

    What's the non lifted space frame to grill?

    I'm using a stock bumper and want a stock look while getting as much room under the hood as possible. As it stands now, the bottom of the grill nearly touches the top of the frame. The 35 years of weight sitting on the rubber puck must have changed the original gap but how much? If someone has...
  14. J

    Anyone try a Holley model 4010?

    Had a chance to examine a 4010 for sale cheap. This one had no provision for AT kick down so I passed, but it was very close to an Autolite 4100, a carb I've always loved and most the adjustable parts needed to dial it in are interchangeable with 2300,4150, and 4160s. It was light as a...
  15. J

    Best C4 core to look for?

    My C4 was rebuilt by a knucklehead who puts shift kits in everything without being asked to. This proved to be a bad idea on EBs. Even on light accelerations it chirps the tires. The two auto Broncos I bought new had shifts that were plenty firm from the factory. I know that part of the...
  16. J

    Restoration or modification ?

    There are many on this forum who can't transform their Bronco enough, even in cases where the original-stock parts are as good or better than the after market offering. On the other extreme are meticulous restorers who will only use NOS parts and do all the inspectors marks. I bought two of...
  17. J

    Ford Track Lock worth rebuilding?

    My limited slip has worn out and has no effect. I have no problem with the 28 spline axles and have no interest in fixing things that aren't broken. So far the only reasonable alternative I've been able to find is a true track. The ARB would cost at least $1500 with me doing most the work...
  18. J

    Coil spring in lower radiator hose?

    Over the years the makers of lower radiator hoses have stopped including the coil spring stiffener. It seems pump suction would be as likely as ever to collapse the hose. I know a pressurized system would help preventing this but that's nothing new. The newer springs are stainless so rust isn't...
  19. J

    Any epoxy that works on carbs?

    Many of the Holleys are made to be "universal fit". This often means PVC and vacuum ports in the front, back, and side. I have PVC in the phonelic spacer so the ones in the throttle plate are just potential vacuum leaks. Holley recommends pressing soft lead into holes that need to be plugged...
  20. J

    AZ Heads up '77 being parted not mine

    http://www.ebay.com/itm/120911389373?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Found this on EBay. It's a junk yard in Albert Lee Minn. The rear tank with skid plate,factory sway bar with brackets on disc brake dana 44,rear big bearing 9in.,and other rare '77 parts still intact...
Top