• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Quality headliner needed

    Today I noticed my cardboard headliner was sagging and lying on the role bar. Recent monsoon rains bringing high humidity that made the cardboard soft. The headliner is about 1/3 the thickness of a Ford headliner I bought at the dealership in 1974. It came in a flat box, not rolled up like the...
  2. J

    Most Practical low dollar Engine/Transmission swap

    I've bought and run 6 or 7 Crown Vic P71s over the last 40 some years and found the 4.6/AOD combination to be a cheap to buy and run combo in a 4000lb Crown Vic. It gives excellent mileage, great low end torque, and plenty of power. I don't suffer from the need to make an EB into a dragster. I...
  3. J

    Dipstick/Tube Convusion

    My '77 is a little different than most. The engine is a 351W with an OE 302 Bronco pan modified to work on a 351. I had a 351 conversion pan and dipstick before a frame off, but the tube kinked when the shop bent it without a tubing bender. I couldn't find a new one of the same type. So I got a...
  4. J

    AZ 351 duel sump screw in stock dip stick tube

    Need a 351 stock duel sump dip stick tube sold by vendors for swapping in a 351. The Wild Horses version is a good example like this;https://www.wildhorses4x4.com/product/Oil_Pan_Kit_351W/bronco_Oil_Pans. I have the dip stick, but will buy that too, if you like.
  5. J

    Is There any way to escape Chinese junk?

    I had to remove and replace the vacuum booster to work on the steering column. A nut was lost in the gravel and none of the 30 lbs of used spares worked. My guess was, I needed a metric nut. A trip to ACE proved it. How can vendors sell reproductions of '60s and '70s US classic vehicle parts...
  6. J

    Help Needed with '78 turn signal switch in '77 EB

    I've got a '78 Bronco turn signal switch I need to make compatible with my '77 harness. Has anyone who has done this swap made a diagram of switch side of the semi circular plug. One problem is the '78 horn relay, that schematics show as needing 4 wires. The '74-'77 relay only has 3. The horn...
  7. J

    Recomended brake pedal height

    My '77 came back from the restoration shop with the brake pedal about 1.5' off the floor board. That was obviously too high. So I lowered it by turning the clevis. Now I'm wondering what the ideal height should be. The accelerator pedal is set to fully open the throttle as the pedal hits the...
  8. J

    Early 302 can in a 351W

    I got a Comp Cams hydraulic roller cam for my 351. I asked for a super mild low end torque cam. No one, them or I discussed exactly what engine the grind was designed for. In use it runs like crap. I used the 351 firing order in routing the plug wires. Could the cam be a 289 or early 302 type...
  9. J

    Carburetor link rod?

    My '77 came back from the restoration shop with an nonadjustable link rod and the OE rod is missing. I don't want a full linkage kit and the only carb rod the vendors sell is a so called improved version. Considering this is a restoration the OE type is what I need and I don't see how it could...
  10. J

    Starter motor feed wire routing

    Just got my '77 back from a professional frame off and discovered the starter motor feed wire was bolted to the exhaust manifold where it ignited on the way home. It likely would have shorted out on the next restart. Where was it originally routed?
  11. J

    Brake booster push rod adjustment

    Got my '77 back from the restoration shop after a frame off. On the way home, the brakes seemed to be dragging but I got home. A short drive the next day ended with the brakes locking up. I had to crack the bleeders to get home. Research tells me the booster push rod was holding the master...
  12. J

    Least dusty pads for '77 discs

    Just got my '77 home from a 1 1/2 year frame off professional restoration, and found extreme amounts of black dust on the front wheels. I asked to have ceramic pads installed. Now I wonder what I have and what to do next? The pads and rotors are new so a different set of pads should be a...
  13. J

    Replcement Horns

    The OE horn is the single low tone. Mine filled with water so it's toast. To replace it I would like to as close as possible keep the original appearance of the optional duel horn. The single low tone just isn't loud enough to wake up a texter coming at me in my lane. The duel horns would have...
  14. J

    Tail Light pigtail replacement

    I need to replace the tail light pigtail in the bucket. WH sells the pigtail but I don't see how it or the original are secured to the bucket. They are apparently inserted from the rear but are neither screwed in nor snapped in. Perhaps they are soldered. any insight would be helpful.
  15. J

    Humvee LED headlight wiring

    I got a pair of Humvee LED headlights made by TruckLite. There are 3 wires ending with male bullet connectors coming out of the back of the housing. There's nothing like the 3 blade female plug for powering most headlight bulbs. I don't want to butcher the original harness, so I have to find or...
  16. J

    Need C4 vacuum line clips

    I've been through this before. But transmission rebuilders are still tossing parts they don't remember removing. I told them before they started that the clips are needed. They didn't listen. I found some junk yard replacements after an earlier rebuild. Now, junk yard C4 parts are a lot harder...
  17. J

    Guide plates for GT40 heads

    Having problems finding GT40 push rod guide plates. '96 up GT40 heads are drilled and threaded for 5/16" studs that I have. The guide plates need a 5/16" stud hole size and a 5/16" push rod diameter. I can't find any at Jeg's or Summit.
  18. J

    Original looking 77 master cylinder hoses

    I've gone through the offerings of the vendors, and can't find 77 power brake master cylinder hoses that look original. This is a restoration, so that's why the patched together hoses or tubing loops won't work. The originals worked well for many years so good reproductions would be what I need.
  19. J

    Tailgate Drain Installation

    I'm putting the 69-77 tailgate drains on a '68 tailgate. There are no screw holes to re-use and my memory is far from exact. A photo would be a great help. Measurements require reference points, but that would be best. The top, like the rest of the body, is a '77, so the weather stripping is the...
  20. J

    3 point seat belt anchor on role bar

    What I need is a clean anchor point to bolt the shoulder harness guide to. I've seen a threaded insert to put in the back side of the role bar, that the harness guide bolt threads into after passing through the bar.. They have a shoulder that is contoured on the under side matching the radius of...
Top