Search results

Evans It wasn't that slick, everything was fairly easy. Jason Morlan got a little sideways and wasn't able to bump up the rock and it was to slick to crawl so he had to grab cable. We didn't make the trail area you are talking about. i would remember a trail like you are describing.

Tires Luke I would go with the 37MTR's. I put 35's on a couple years ago than took them off 6 months later for bigger. You may not have the same issues with size that I do though.

Wheeling this Sunday I'm going up this Sunday. Jmaples

Wheeling Nate should come unless he is going to lame out. Jason Morlan may come down from Lynnwood with a buddy of his in a Jeep. 68 doesn't sound like you have to much to do... get crackin

Power ball I'm not sure, it's the only one they had. It works pretty good takes no time to do a wheel.

Powerball I use it and love it, it's worth the $

Wheeling this Sunday Cool, let's meet up at 10 if that works for you. At the main unload lot when you first roll into the Park. If something changes for you give me a call on my cell.

Which Sunday?? Sunday the 22nd, so get your stuff together...this next week. I'm willing to give up my HAWK ticket to go play in the Bronc. What say you??

Doubler I did, I had a few hickups but everything seems good now. Thanks alot for the 203, it shifts nice...

Well I've finally got a few of my projects done on the rig. I think I'm going to head up to Evans Creek this Sunday if anyone is interested. I know, I know the HAWKS are playing Vikings. I'm giving up my seat to go play in the dirt, whose up for it? Anyone??

I contacted Saddleup and he is willing to make some of his traction bars if anyone is interested. His would go for $200.00. Is anyone interested? He wants at least 3 people. Jmaples

435 It turns out that the new output shaft was 1/8 inch to long that was supplied in the kit. I did the install, the tranny shop only rebuilt my 435 and installed the new output shaft for me. Everything from the 203 back was fine, I for sure thought it was something the tranny guys did. So...

435 to 203 So when everything was finished with this install I could barely get into 1st, I could bang it into 2nd, bang it into 3rd and it would go into 4th. Pulled the cover and you could engage all the gears by hand, start the engine or put the conver on and problems. The tranny shop blew...

I have been in the middle of installing the WH 203-20 combo in my bronco. Since I was pulling everything out, I went ahead and replace the clutch and had my 435 rebuilt. Today I started the truck after putting fluid in the 3 gear boxes left the hubs unlocked and put the front end in Hi. It is...

Tuffy Console I used 4 Craftsman sockets as spacers, thought it was cool..

Fj40 Vs Bronco I've currently got a 76 Bronco that I traded my 76 Fj40 for about 2 years ago. It's all been said before but as with any truck they both have there goods and bads. I to prefer my Bronco over the Fj even though they are a stout rig. The Fj's are getting harder to find with the...

Front end Vibration Make sure you check all the obvious things, Steering box bolts, trac bar bots and bushings, (the previous had both been culprits for me in the past), I don't run a steering stabalizer and it just seems like it will be hiding the problem.

Hank We decided not to do a autoposy, but we believe it was cancer. He had 2 small lumps under his arm pits, last year the vet said don't worry if they don't change shape or size, that's the last time i do that. If it was cancer i guess there is nothing you can really do for them. He lived...

It has been a week now since HANK our family dog passed away. Some of you on this board may have meet HANK, he has been at my side for the last 6 years. Hank was a wonderful friend and is deeply missed by my family. Hank was never happier than when he was sitting in the Bronco with the wind...

Psvb Mtg I'm not a member but I'll come out, should be a nice day for a drive. JMAPLES