Search results

Cool, I will probably get into Ouray on Sunday July 31 and will leave on Monday the 8th.

I am planning on making the trek from Texas this year for the Rendezvous. I will plan on staying in the area longer than the 3 days to make the trip worthwhile. Is anyone going to be there longer and want to do some additional trails? If so before the un-official event or after? Thanks Andrew

I would be up for regular social get togethers. I could make weeknights more often then weekends. The Bone Daddy's up on 183 does have a carburetor table. Andrew

I pulled the ring gear off and measured the runout on the new ARB locker. There is .009" of runout on the locker. I was careful on how I mounted the ring gear on the locker, so I don't think I somehow warped the carrier. I would hope that isn't even possible. I am going to try to rotate the...

Thanks for the information, it is certainly helpful. This is a brand new Yukon ring and pinion set and a new ARB locker so I would like to determine why I am getting the variation in backlash around the ring gear. When mounting the ring gear I did as the directions indicated and heated the...

The backlash was set to around .010 inches in that picture. I thought it looked like the pinion was a little far out as well. I tried moving it in closer, but the pattern did not change as I expected. The below pictures show it .06 closer. I may just have to play with the backlash some more...

I am in the middle of setting up new gears in my Ford 9" and trying to determine a good gear pattern. Can anyone give me an opinion on if the gear pattern below looks reasonable. Thanks. Andrew

I am backing out as well. I hope this does go through for everyone, but I can't wait.

I put a stock spare tire carrier on my 66 and the only problem I ran into was the raised ridge horizontally across the tailgate. In 66 this is a step down, versus later years it was a semi circular ridge. It is tough to explain. If you look at the bracket which you mount to the tailgate you...

I am in for Dana 44 and 31 spline 9" with 4.11 gears. If the price is right on the compressor I would get that too. Part Numbers: RD116 RD119 CKSA12 Andrew

Depending on price, I would be in for four 5100's.

Don't add alochbaum@austin.polycom.com. That is me and I am already on the list at #29 above. Thanks. Andrew

You can count me in for a pair of lenses and 60/55 bulbs.