Search results

That would be the oil pressure sender. Looks like the wire got cut somewhere along the way...

I had this happen as well. Ring and pinion guy said it was time for a new axle shaft. They are relatively cheap so I wouldn't mess with trying a band-aid repair...

pm sent back to you Jim!

jmangi62, I hated the belt squeal too... its just a memory now. :) You do not need an a.c. delete pulley, you can just run a shorter belt. Unfortunately, you can't use the waterpump or alternator as they are specific to the Explorer. Take a look at this write-up from the tech library. It's an...

Thanks for the bump. Hit me up with a zip code and i'll see what I can do... :)

I run only external trans cooler. My previous transmission went out and polluted the cooler in the radiator. Its impossible to clean the internal cooler but I didn't want to throw away the fancy aluminum radiator so I bypassed it. (also, trans cooler was in hot tank as it was reverse...

When you said you ran down an innocent Bronco owner I thought the worst... ;) Very neat story! Small world for sure.

Give it some time and things will sort them selves out...

Lucky score! Have you figured out what you want to do with it yet? Congrats!

Doing this as well... in the middle of my gear change... bare housing. Broom stick inserted from passenger side, put a rag in drive side tube from center. ram it thru. inspect with flash light and repeat... switch to other side. last time thru, soak rag with kerosene or laquer thinner...

When I had the stock dash, I also got rid of the ash tray and speaker grill as they didn't serve any purpose...

So, I am trying to get my Bronco back on its feet (so to speak). Winter upgrade includes Torino axle housing, 31 spline locker, Yukon axle shafts, R&P and Explorer disc brakes. The housing is in the truck and center section bolted up. I bought the Currie spacers and installed them on the axle...

Bump for sk1nw4lk3r. Got my cut outs yesterday and I really like them! Good quality product. :)

Awesome pics! A real snapshot in time. Very talented man who had an interesting life. Condolences for your loss but nice to see you are celebrating his life.

I would think in front of core support would be more effective. I went low and put mine down by the cross member... (due to space constraints)

Awesome truck! Clean it and preserve it but wouldn't molest it... but its yours, so do what you want with it. Just think things thru before acting.

I have the Volvo set up as well and like it alot. Since the fan motor came from the junkyard, I've thought about replacing it before it fails. Anyone know of a higher performance motor that bolts in?

Not sure what the dimensions are but are you trying to put a 351 dizzy into a 302? there aredifferences between the 2...

A little hard to tell but it looks like the linkage to the transfer case is above the pivot point of the shifter rather than below it. That would effectively reverse the shift pattern... right?

Different companies make cast iron color... really like the end results...