Search results

Don't really need the long arms for everyday use. Most say that the long arms increase body roll. The cage lift is supposed to be real soft. I have the 3.5" wildhorses lift and it gives a nice ride on and off road. Almost as important as the springs is the shocks you use with the springs...

No, I think you need to order the correct shims to correct the angle for the added leafs/lift. matt

25psi was the magic number. Also, I was running .030 not .035. I still don't have a camera, but would like to put some pictures up for you guys to tell me if I am on the right track. The welds do not have any porosity that I can see now. Thanks for all the help. matt

Excellent, I am not a mechanic and was hoping that whis was the case. I will begin searching for the parts. matt

Thanks, AzMike. matt

I am wanting to convert my 302 to efi. I have been told I may have to much cam and vaccum to do this, so I thought I would ask the experts on this board. Some of you Oregon guys may know the engine builder. The motor was built by Garret Machine in Albany, Oregon. The description of the motor...

Cool, I am going to try some more tonight. matt

I have it set at about 15psi. The welds look fairly decent just has the porosity in them. I think I am close enough, I try to stay within 1/4 inch of the metal. I am going to go out to the shop tonight and mess around again. Matt

I bought a miller 210 a few months ago and am teaching myself to weld. It is set up with mix gas and .035 wire. AirGas said this was the best set up. Her is my problem, I am getting little pin holes in my weld at times. Any ideas? I don't have a digital camera, but will try to borrow one if...

Thanks, I guess I will call them and ask them to work up a price. matt

Anybody have any experience with sunray axles? I am thinking of building a bronco buggy and was looking at there 1550 axles. I know they are expensive, but if they are as good as some have said they may be worth the money. thanks matt

I have not checked into the details, but would assume that it is a 5.8. Thanks, if the deal works I guess I will have to change the upper. matt

It is a smoking deal. I think I canbuy the entire truck for 300 bucks! I have a 2inch body lift and a hood scoop any chance I can fit the truck intake? matt

I found a wrecked 93 broncoronco XLT. Is that a good EFI motor to fit in early bronco? thanks matt

Looks good, and I hope you make the stampede with it. I will be there with a bright yellow on 36" swampers. matt

I have been considering the inboard shock set up instead of the rear hoops, but do a lot of street driving and don't want the body roll people speak of. Could a guy keep the outboard shocks as well as the inboard and run both shocks on the road and then take the outboards off when going off...

Arizona is in the process of exmepting vehicles, similar to California. Last year I failed in AZ on the idle side, so I just turned up the idle to about 1300rpm and crossed my fingers. It passed.

Thanks. I can't find that clip, Driven Auto Parts is pretty close to me I will see if I can pick one up from Randy on Monday. thanks

The push button on my drivers door does not work. I took the door apart and the rod from the button to the latch has come off. My question is what holds the peg on the rod in the hole on the latch? thanks Matt

Thanks. I have think flanged headers, so I would guess it is the 1" matt