• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

bump steer? pictures added comment 14

SP66

Bronco Guru
Joined
Feb 26, 2012
Messages
1,363
Actually listed it on ebay yesterday for a few hours---don't want to sell it but i had a terribly nerve racking drive on 95 in south florida--truck really is nice with a great engine, tranny, brakes, looks...
But every time i hit a slope or bump in the road it kinda throws me out of the lane---real nerve racking---sure it's fun to drive to mcdonalds or to get a cup of coffee but i took in on 95 and ended up scared sh**. Slowed to like 35 at times with the big rigs up my a**
local mechanic that owns his own heavily lifted and customized jeep took a look a my rig and steering and said it was built extremely well. Nothing he could do---better than his. Called it bump steer.
I'm on a 4.5 suspension lift with like 1.5 body lift. Tires are fat 33's aired all the way up at like 65psi.
Any suggestions?
Could i drop the lift way down and would that help?
Thanks
 
Last edited:

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Post a pic of your front end. Are the drag link and track bar parallel? You can fix bump steer - lots' of Broncos with big lifts drive very well on the highway.
 

ghost66

Bronco Guru
Joined
Jan 19, 2005
Messages
2,321
Absolutely do not sell it my other 74 did the same thing until I got it fixed, you'll regret selling although bump steer is crazy scary on a highway it's just a matter of lining things up correctly for yor lift Plenty of experienced and smart guys on here will help you to see what needs to be fixed
 

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
From one of your previous posts, you still have the cooper STT tires right?

I know they are a LT tire, but with the weight of the Bronco that sounds a little high to me, how did you arrive at 65 being the right psi? And if thats cold pressure, you are getting even higher once warm, with that much air I would think those tires may bounce around a little.

There may be other steering related items to look at, but trying to cover the basics too.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Bump steer is fixable. The problem you're going to have, is that the worn out components that normally attribute to bump steer (bushings, tierod ends, ball joints, etc.) are all probably brand-new and shouldn't have any slop. I agree you should look at your trackbar & drag-link angles. Do you have a steering stabilizer?
 

ericbee

Full Member
Joined
Jan 27, 2012
Messages
209
Drop your radius arms with drop brackets, bet they are stock and thats the problem.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
Post a pic of your front end. Are the drag link and track bar parallel? You can fix bump steer - lots' of Broncos with big lifts drive very well on the highway.

yes pics will help greatly, also that is way too much air in the tires
 
OP
OP
S

SP66

Bronco Guru
Joined
Feb 26, 2012
Messages
1,363
Man I am in this EXACT same situation. I've had a couple instances of "bumping" in front of an oncoming dump truck on a 2 lane road at 50MPH. Plus I've almost ran a couple people off the road. Pretty unnerving! I recently (like 2 days ago) decided it wasn't responsible to even drive anymore.

I have had everything checked out and it appears to be set up correctly. I thought my PS box was fine because it has very little play (like none) but I finally got the truck to an old ford expert and he showed me that the box was tightened up as much as it could be. He is certain the box is bad. So I am about to send mine in to West Texas Off Road to have them rebuild it. $140+shipping and right now they're only at 2-3 days turn around time. Eventually I'm going to upgrade to a 4x4x2 box but for now $140+shipping to solve my problem sounds really good.

Hope that solves your problem. I explain mine as not feeling to loose or tight. Feels good until you hit any minor bump or curve or slope in the road. Then bump---out of the lane. Oncoming traffic, light poles...Does not seem like a steering problem to me--seems like a suspension issue.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
I don't think it's your steering box. My EB has 2.5" suspension, perfectly parallel trac-bar and drag-link and I get zero bump steer. That said, the steering still isn't perfect, I had my PS box rebuilt and all that really does is take play out from worn parts. That has nothing to do with hitting a bump and darting to one side or the other...

It looks like from your other pics that you're running HD steering links, and already have dropped radius arm brackets. Post a pic of your trac-bar, I suspect it's at a steeper angle than your drag-link... With 4.5" lift, I'm sure you already have a trac-bar drop so maybe you just need is a little more with a trac-bar riser.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
I don't think it's your steering box. My EB has 2.5" suspension, perfectly parallel trac-bar and drag-link and I get zero bump steer. That said, the steering still isn't perfect, I had my PS box rebuilt and all that really does is take play out from worn parts. That has nothing to do with hitting a bump and darting to one side or the other...

that is true, about all a worn out steering box will do is wonder on the road some
 

Jeff10

Contributor
Bronco Guru
Joined
Feb 20, 2011
Messages
2,182
Loc.
Indianapolis
Hey Guys,

First recommendation would be to drop the tire pressure significantly. Unless those are E rated tires, I can't imagine running that much air pressure. Mid-30s, or even high 20s would be a good start for comparison.

Secondly, take your Bronco to get an alignment shop and get a detailed printout (even if you need to pay for it). That will give you the information you need to answer all the questions that will be asked here.

Both of our Broncos were tough to drive at first. The '71 required a lot of work... replaced rag joint (completely destroyed) with all mechanical linkage, replaced all heims, tightened steering gear box at frame, corrected track bar orientation (relative to drag link), and probably most importantly, rotated knuckles to gain more caster.

The '70 also required rework of the track bar orientation and knuckle rotation.

One of the give-aways for us was sitting in the Bronco you could raise and lower the front end of the Bronco by as much as 2" just by turning the steering wheel. The force of the track bar against the frame caused it.

Although bump steer may mean a couple of different things, what I felt (with both Broncos) was wandering.... when the Bronco hit a small bump in the road, or when the steering wheel was turned.... the steering would not return to center. Increasing the caster made a huge difference.

Feel free to PM me if you'd like more details about any of this.

Good Luck

Jeff
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
Bump steer occurs when the body and front axle separates or comes closer together. As in hitting a bump.This is what happens, because the track bar and the drag link are different lengths and one end of both is attached to the frame while the other end of both is attached to axle as the suspension goes from full compression to full droop they make a diff. arc and the difference causes one of two things to happen. Either the steering wheel will move back and forth or the front wheels will go left/right suddenly. Because of the mechanical advantage of the steering box and your reaction the wheels will be be doing the moving. Think of how a parallelogram works and what happens when any side is a diff. length, That is bump steer. Because Jeeps do not have this setup a master jeep mechanic wouldn't know anything about bump steer.
Now, back to your problem. The things I find wrong in front ends/ steering are bump steer, toe-in, caster, steering box not centered and stuff loose. Stuff loose is a biggie. So start at the wheel and be sure it is not loose, then the shaft slip and U-joints, free play in the box, pitman arm loose on the sector shaft, check all the ball joints for any free play including the knuckle ball joints and the the track bar bushings, also free play in the wheel bearings. If/when all are sloop free go to centering the steering box and adjustment.
While it is true that the tie-rod and track bar should be close to parallel that is a "rule of thumb" and the more horizontal the bars are the less it matters and the more vertical they are the more it matters. My rule of thumb is you need to run either both the track bar drop bracket and the drop pitman arm or neither. Send pictures maybe we can see the problem.
 
OP
OP
S

SP66

Bronco Guru
Joined
Feb 26, 2012
Messages
1,363
Why? Let some air out of the tires, 65psi is nuts and will cause all kinds of tracking issues at speed.

Was putting air in all the family cars and checked the Bronco--was at 35PSI and it said 65PSI on tire so pumped them up---that said it was still scary to drive at the lower inflation
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
From the pics you posted I would get rid of the drop pitman arm and get a stock one. That will bring your drag link up to close to parallel with the track bar.
 

73bronco

Sr. Member
Joined
May 10, 2007
Messages
936
Based on the pictures you should install a trac bar riser at the axle. Your trac bar is at a far steeper angle than your drag link causing all kinds of bump steer!
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
Based on the pictures you should install a trac bar riser at the axle. Your trac bar is at a far steeper angle than your drag link causing all kinds of bump steer!

in pic one it looks like he already has one
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
From the pics you posted I would get rid of the drop pitman arm and get a stock one. That will bring your drag link up to close to parallel with the track bar.
Based on the pictures you should install a trac bar riser at the axle. Your trac bar is at a far steeper angle than your drag link causing all kinds of bump steer!
Do one or the other!!! But they will basically accomplish the same thing. And that is to make the track bar flatter. I'm not a big fan of dropped pitman arms, but in your case and seeing how flat the drag link is, I'd be inclined to keep it, and raise the track bar mount at the axle. I would not install a dropped track bar bracket at the frame...

Here's a link that explains our steering geometry. I like it cause it's got pichers!!
http://bulletproofsteering.com/geometry.html

As you can see, parallel is not always the answer, and is only correct if the drag link and track bar are the same length.

Also, make sure your front differential is centered between the frame. I usually use a plumb bob to measure from the frame to the inside of the wheel on both sides. Don't measure off the body, since the body may not be centered on the frame.
 
Top