SteveL
Huge chevy guy
My floor jack died. I don't trust most harbor freight tools but are the floor jacks decent? How about the aluminum ones to save my aging back?
Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
Hf floor jacks
- Thread starter SteveL
- Start date
I have a 1.5 ton aluminum one for about 9 years, it has limits, but overall happy with it. Light weight and easy to take the handle off for loading. Front roller and small rear wheels sometimes don't play well trying to move a Bronco, but the up and down is fine. I have a 2.5 ton for the bigger rigs I work on.
Broncobowsher
Total hack
- Joined
- Jun 4, 2002
- Messages
- 37,063
Yes, the jacks are good.
The aluminum ones are not that light, nor lift very high. I have one of the old ones from when an aluminum jack really was an aluminum jack. today they are a hybrid. Aluminum for the showy bits, and a good bit of steel (and weight) inside.
What I, and most of my friends do now is use the 100# high lift long reach HF jack. And we never pick it up, just drag it around.
How portable do you need?
The aluminum ones are not that light, nor lift very high. I have one of the old ones from when an aluminum jack really was an aluminum jack. today they are a hybrid. Aluminum for the showy bits, and a good bit of steel (and weight) inside.
What I, and most of my friends do now is use the 100# high lift long reach HF jack. And we never pick it up, just drag it around.
How portable do you need?
SteveL
Huge chevy guy
Thanks
Agree. I have a 3-ton floor Jack from HF. Works as expected and no complaints.
No problems with my 3 ton Daytona jack, I've had it for 5 years without an issue. The stands are the ones that had a recall a few years ago
yah i think it was the pittsburgh stands by HF that had the recall?
i too use the daytona 3 ton and never had issues. lost track of how old mine is.
i too use the daytona 3 ton and never had issues. lost track of how old mine is.
I rebuilt my father's 1950's Blackhawk floor jack. I was stunned I could still get a rebuild kit for it!
It turned out too nice I didn't want to use it, so I gave it to the next gearhead in the family, my nephew.
It turned out too nice I didn't want to use it, so I gave it to the next gearhead in the family, my nephew.
I have several of HF floor jacks including the daytona and works great. Had several models of their jack stands and all of them had a recall. Threw all the stands out.
Have 3 Daytona jacks, love them all. My favorite is a low profile long frame, have 2 of them.
ntsqd
heratic car camper
I had two Hein-Warner floor jacks. Both needed to be rebuilt. The cost of a kit to rebuild one of them was more than the HF jack that replaced them. I *really* wanted to keep them, and I resisted recycling them for several years, but the cost of a rebuild never went down enough to justify it. Couldn't even sell them, got no replies at all. Not even when I made them free. That was sad.
I have this one:
and have had it for a few year, use it a TON and love it.
Just checked and looks like I bought it in '21. Got the guarantee on it and zero issues,.
DAYTONA 3 Ton Long-Reach Low-Profile Professional Floor Jack with RAPID PUMP
https://www.harborfreight.com/3-ton...al-floor-jack-with-rapid-pump-blue-56641.htmland have had it for a few year, use it a TON and love it.
Just checked and looks like I bought it in '21. Got the guarantee on it and zero issues,.
- Joined
- Nov 3, 2003
- Messages
- 51,613
I wouldn’t throw out any of the harbor freight Jack Stands. If you live close enough to one to take them by, see if they’ll still take them back.
That’s for any that hadn’t heard about the recall.
They only recalled certain numbers, but at some point fairly early on, near the beginning of the process, they literally included practically every previous harbor freight jackstand ever sold.
I turned in four of my own, and probably 10 or 15 of other friends stands, and we all got store credit for the full value of each one at the time. Not sale prices, not 10-year-old prices. But current prices at the time.
I’d say they handled that process pretty well.
That’s for any that hadn’t heard about the recall.
They only recalled certain numbers, but at some point fairly early on, near the beginning of the process, they literally included practically every previous harbor freight jackstand ever sold.
I turned in four of my own, and probably 10 or 15 of other friends stands, and we all got store credit for the full value of each one at the time. Not sale prices, not 10-year-old prices. But current prices at the time.
I’d say they handled that process pretty well.
- Joined
- Nov 3, 2003
- Messages
- 51,613
I’ve got one of their lightweight 1.5 ton jacks Steve. Maybe I got it back when they were still mostly aluminum, but I find it quite light and easy to carry around with me.
Sometimes I lift it and carry it by the long tube jack handle, sometimes I Carry it by the convenient carry handle welded to the side.
Either way, as long as it’s strong enough to do the job for you, it’s a much easier process to move around.
Sometimes I lift it and carry it by the long tube jack handle, sometimes I Carry it by the convenient carry handle welded to the side.
Either way, as long as it’s strong enough to do the job for you, it’s a much easier process to move around.
I do wish the saddle were removable on this jack but other than that it's fantastic. and it also shows on sale right now if you have a membership. $190 instead of $270. Membership is only like $30 so you'd still save if you get the membership. Good if you need more stuff.
And if you want a jack stand that’s good for the frame height, these are great:
https://www.amazon.com/dp/B0002H335A/?tag=classicbroncos-20
https://www.amazon.com/dp/B0002H335A/?tag=classicbroncos-20
I had 2 of the Pittsburgh Jack stand’s. They weren’t the recalled model numbers/serial numbers. Took them in to HF and they swapped them out for heavier duty Daytona Jack stands no questions asked their idea said they didn’t want any of them in use just in case.
