broncofiresmith
Sr. Member
- Joined
- May 6, 2006
- Messages
- 416
I am working on a 1970. My water temp gauge wasn’t moving off cool (didn’t seem to move at all) and my oil pressure gauge was pegged all the way at max with the engine running. I replaced the temp sensor and now as soon as I turn the key on without the engine running my water temp gauge maxes out and I noticed the oil pressure gauge will go to approx 40 without the engine running. The fuel gauge seems to be accurate but at times will go from full to empty and then back to normal. I added a ground from the dash to the inner fender supports but that didn’t seem to help. Any thoughts? Thank you











