• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New motor, same problem.

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Score! Well down tracking it down. I did that once too because I thought the distributor turned the other way!
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Score! Well down tracking it down. I did that once too because I thought the distributor turned the other way!

Haha I did that when I first put the motor in. Had a Chebby guy helping me...
 

treihesse

Bronco Guru
Joined
Aug 1, 2008
Messages
1,459
Well im glad u figured it out.. feels good when you do that. We have all done a brain fart. Put a cheap inline fuel gauge to check your psi. I had really good luck with the carter fuel pumps. Check the float to make sure its functions properly
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
The guy I got the motor from said it was out of a '72 so I didn't even think HO...Oh well it runs now!
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
.. I didn't read all you post .. But I had one that had dirt in the fuel tank. I starved out 2 motors on a one ton chevy haul farm truck.. Great truck but that got expensive.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
...Accelerator pump isn't working on the new carb and that's causing some issues but she runs!

One thing I dont get is I still can see gas coming out of the right vent tube of the carb at 3/4 throttle ish...could I be pumping too much gas? I switched to an electric pump. supposed to be 4-7 lbs

Are both of these things happening with the newer carb? Or have you switched back and forth again?
Even with the shorter broken off vent tube, you should not have fuel up high enough to spill out. With a full height tube, especially so.
Not sure why it would do it more at 3/4 throttle, unless it's something to do with a certain harmonic vibration creating just the right conditions.
But you're still set too high it sounds like. OR, as you might be thinking, the pump is possibly putting out too much for the needle-n-seat of that particular carb. Usually a 4-7 pump is just right, but if the pump is pushing a little more than rated, or the carb's valve is sticking, it could do what you're seeing.

Hard to say. But keep at it. Sounds like you're coming down the home stretch.

Paul
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Are both of these things happening with the newer carb? Or have you switched back and forth again?
Even with the shorter broken off vent tube, you should not have fuel up high enough to spill out. With a full height tube, especially so.
Not sure why it would do it more at 3/4 throttle, unless it's something to do with a certain harmonic vibration creating just the right conditions.
But you're still set too high it sounds like. OR, as you might be thinking, the pump is possibly putting out too much for the needle-n-seat of that particular carb. Usually a 4-7 pump is just right, but if the pump is pushing a little more than rated, or the carb's valve is sticking, it could do what you're seeing.

Hard to say. But keep at it. Sounds like you're coming down the home stretch.

Paul

It's the new carb. I can push the pump by hand and it works just fine it's like the spring that controls the arm for the accelerator pump isn't strong enough.

And the fuel dumping out of the tube happens with both carbs. its enough that the fan blows it back into my windshield (I haven't put the hood or air cleaner back on)
 

mcknight77

Full Member
Joined
Feb 19, 2012
Messages
219
Loc.
Caldwell, ID
Why are you not running a mechanical fuel pump?

If the HO doesn't have a boss for one in the timing cover the first thing I'd get is a fuel pressure regulator and crank down the pressure from that electric pump. Have you put a fuel pressure gauge on it to see what the pressure actually is?
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Because I have the wrong timing chain cover for the newer motor and the fuel pump eccentric wouldn't fit under it. The electric pump is just supposed to be temporary. I'm going to get a regulator today and see if that helps
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
I haven't checked the actual issue because the damn parts stores want an arm and a leg to rent one.
 

mcknight77

Full Member
Joined
Feb 19, 2012
Messages
219
Loc.
Caldwell, ID
Because I have the wrong timing chain cover for the newer motor and the fuel pump eccentric wouldn't fit under it. The electric pump is just supposed to be temporary. I'm going to get a regulator today and see if that helps

You can test it yourself by partially crimping a soft fuel line and see if the carb clears up the idle and stops spewing fuel out the vent. I would use one of those wingnut hose clamp/closure thingys. Small vice grips work also set to not totally close off the hose.
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
That's a good idea, thanks. Just this and the accelerator pump acting up and I should be running like a dream
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Took it out and drove it today it's almost running like I want it. Pinched down the fuel line and it ran a little better but there is still gas coming out of the vent tubes.

I've got a pretty gnarly oil leak caused by a frustrated and sloppy install of the timing chain cover haha. Guess tomorrow it will be tear down and do it again time. Should've taken a minute and had a drink before hastily installing it. lesson learned!
 

Attachments

  • 20140221_165248.jpg
    20140221_165248.jpg
    87.9 KB · Views: 25
  • 20140221_172409.jpg
    20140221_172409.jpg
    58.2 KB · Views: 30
Top