OCBR For sale whatcha bringing thread.

[mp]

Buddy is looking for a nice used radiator for 302

 

[br0nc0xrapt0r]

35x16R16.5 bogger, 95% tread $100

 

[sprdv1]

Skid plate is spoken for..........

 

[br0nc0xrapt0r]

Also have a 351W Van serp belt bracket set with the saginaw bracket. $100 delivered.

 

[sprdv1]

To the top.........

 

[br0nc0xrapt0r]

Pics of the brackets, comes with the sanden pump and the Alternator.

 

[br0nc0xrapt0r]

brackets sold, I have a 96 explorer upper, lower and harness no computer make me an offer.

 

[Kyle.malone]

Smittybuilt XRC8 Winch with synthetic rope and fairlead for synthetic rope. I have had this on my rig for 2 years and have had no problems with it. $200 for Winch, fairlead, controller, and hook.

 

[Kyle.malone]

Dana 60 Weld on brackets. Will mate directly up to the Duff long arms. Make it easy for you to swap in the Dana 60. Even set up for you to reuse the bushings off the Duff arms so you can get replacements if you need. I bought these to use on my dana 60 swap, but ended up not needing them. $150 is what I got in them. They are pre angled is the reason why they are marked for which side they go to.

 

[fablife]

this is cross posted from the classifieds, I can bring to OCBR

4) 42x15x15 Swamper Iroc's mounted on Eagle 15x10-5/5.5 75% or better tread$1,850
http://deepsouthfab.net/misc/iroc1.jpg
http://deepsouthfab.net/misc/iroc2.jpg


NIB BC Bronco rear formed quarter protectors (I'm not sure what run they are) $400
http://deepsouthfab.net/misc/bc1.jpg
http://deepsouthfab.net/misc/bc2.jpg
Spare parts is first in line for these, picked up at OCBR.

original under dash a/c with compressor and mount $100
http://deepsouthfab.net/misc/ac1.jpg
http://deepsouthfab.net/misc/ac2.jpg
http://deepsouthfab.net/misc/ac3.jpg
http://deepsouthfab.net/misc/ac4.jpg
http://deepsouthfab.net/misc/ac5.jpg

2 sets) of beltline side moulding typical used cond. $50 ea set)

3) pto set ups, 2 have shafts and brkts, 2 have shifter handles $ 75-100obo

4) manual steering boxes 2 have lower bell joint with cut shaft and stock pitman arms $45 ea

original 67 radiator surge/day tank very good cond $50

will ship from 70445 on your dime, thanks, JD
JD@DeepSouthFAB.net

 

[SpareParts]

I'll take the BC corners, I'll send you a PM.

 

[sprdv1]

Pics on page 11.....

77 Gas Tank (poly) The larger capacity one -- $35

Stock Air Cleaner -- $35

351 Bronco Script Valve Covers (NIB) Never used - $140

Coil Springs -- $80 (Forgive me, but I can't for life of me remember if it's for 2.5 or 3.5 SL). I'm sure there's a way to measure it. Slightly used per the seller I got them from.

Steering Stabalizer - $50 (Mounted on 71 Bronco) Never Driven


(2) Dash's
1) with Wiring $100
2) without $80

 

[goneballistic]

Ill bring this too...
11x10 trans or power steering cooler. $15
It's good. Just didn't end up using it.

Sent from my iPhone using Tapatalk - now Free

 

[76 One ton]

Ill bring this too...
11x10 trans or power steering cooler. $15
It's good. Just didn't end up using it.

Sent from my iPhone using Tapatalk - now Free

Pm sent Jamey

 

[nboost]

Anybody have any main jets for the 2100 they want to bring and sell. I am looking for 50's or 51's

 

[br0nc0xrapt0r]

Anybody have any main jets for the 2100 they want to bring and sell. I am looking for 50's or 51's

Napa ought to carry them If you order them from mikes carb parts and have them mailed to the park that would work too.

 

[sprdv1]

I'm bringing these for Jake.. Ping me if you need one

paper towel holders

 

[lilthom]

I just picked up another Bronco for my fleet. It came with a 6 point roll cage that I won't be using. It is the typical right out of the catalog type. The legs back to the wheel wells are removeable. Anyone interested in me bringing this to OCBR? Oh yeah, when I complete this next project I will have a good uncut 73 tub for sale. It definitely won't be available for this weekend. I also think I am ready to part with the complete set of shop manuals that came with my first 73. The original owner was himself a mechanic. Included with these is a wiring diagram that is printed on a sheet of paper that must be about 2 feet by 3 feet. I haven't a clue what they are worth. If any one has a good guess let me know. If they really aren't too rare then I just may keep them.

 

[sprdv1]

You definitely gonna have a fleet here pretty soon.. lol

 

[Kyle.malone]

Dave.. I want one of the paper towl holders Jake made.