MonsterBIlly
Sr. Member
- Joined
- Dec 17, 2015
- Messages
- 461
Here is the Snioer I have. https://www.summitracing.com/parts/...qkV7-ScaPa2Wm-KnclN49KkpP6AhxpqRoCde8QAvD_BwE
I think I found the issue. I switched out the pcv to a different unit. While it was idling I pulled the pcv from the valve cover and it was being pulled fully open by vacuum. I assumed at idle it SHOULD NOT be fully opened. So I had another pcv laying around so I swapped it. The new one I out in was not fully open when idling. It was barely open, pretty much closed at idle. This corrected the lack brake vacuum and all is working okay right now. I'm still getting a small amount of oil mist blowing out of the vent but much better than it was.
I think I found the issue. I switched out the pcv to a different unit. While it was idling I pulled the pcv from the valve cover and it was being pulled fully open by vacuum. I assumed at idle it SHOULD NOT be fully opened. So I had another pcv laying around so I swapped it. The new one I out in was not fully open when idling. It was barely open, pretty much closed at idle. This corrected the lack brake vacuum and all is working okay right now. I'm still getting a small amount of oil mist blowing out of the vent but much better than it was.











