What have you done to your Bronco today?

[Karl's 68]

I pulled a 300 foot chain link fence tight with my 72 today. 4.11's in 4-low!

 

[sprdv1]

rcv stub shafts, CV's packaged up, ready to ship out for Pinning...

 

[JefeAZ]

Removed the wheels to sand blast and paint. New rubber is waiting to be put on.

Ya how is that mounted to the windshield? Any close pics zoob?

 

[pat1977]

Paint,paint,paint! oh yeah

What y'all think
Sent from my SPH-D710 using Tapatalk 2

 

[daddycreswell]

Pat1977, looking good. I just got done doing some accent painting my self.

 

[pat1977]

Thanks, you got pics of your work

Sent from my SPH-D710 using Tapatalk 2

 

[daddycreswell]

Thanks, you got pics of your work

Sent from my SPH-D710 using Tapatalk 2

Here ya go, headlight rings, taillight bezel, mirror, and outside door handles powdercoated. Bumpers, and hood scoop using plasti-dip.

 

[pat1977]

That looks really good

Sent from my SPH-D710 using Tapatalk 2

 

[Acwood04]

I totally took apart the dash and disconnected most of the dash wiring harness because I burnt two power master 140amp alternators and just put a new tuff stuff One in. What's happening is the headlights were dim with the old power master and the radio cut off when you turned the lights on and blinkers etc. I was only getting 8-9 Volts to the battery using a volt meter so the GM style internal voltage regulator blew. Since I just bought Another alternator, Its working fine 14.6 volts to the battery, but the radio cuts off for a tiny split second still, and the headlights kinda blink/dim a little when the turn signals are on. So before I fry this alternator I'm taking apart the dash to double check the grounds and ALL the wiring to ensure no shorts or bad grounds. I'm also going to check the headlight switch tomorrow. I hate electrical.....

 

[TTTGOWYO]

I got all the wiring harness out and picked up some more small parts from the powder coat guy. . Baby steps.

 

[Matt_brianna]

Finished my new exhaust. Hedman long tube headers, pre bent tube kit from summit, and 25" glasspacks. $380 total. Sounds awesome. Money well spent.

 

[half cab]

Finished my new exhaust. Hedman long tube headers, pre bent tube kit from summit, and 25" glasspacks. $380 total. Sounds awesome. Money well spent.

I'd say so...Can ya get some pix of the pre bent tube kit from summit?Sound like a good deal for sure..

 

[sprdv1]

Picking up a set of spare front axles for it....

 

[KeithC]

Moved my 67 again to mow the grass.. One day, one day

 

[half cab]

Moved my 67 again to mow the grass.. One day, one day

So got the cheby runnin uh;D

 

[sprdv1]

Moved my 67 again to mow the grass.. One day, one day

It took one day? lol, kidding....

It'll happen, just be patient...

 

[zoob]

I like the bars from roll bar to windshield. Looks like it mounts to the windshield. I am guessing it's to keep the windshield a little more secure?

Dual purpose as it keeps the windshield secure and I'm running a six speaker sound bar

 

[zoob]

Ya how is that mounted to the windshield? Any close pics zoob?

It's mounted right into the riser off the rampage soft top I will shoot a pic

 

[zoob]

Ya how is that mounted to the windshield? Any close pics zoob?

 

[Fitz24]

Where did you get the sound bar from? Custom, Heep, ????