• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wiring Power to efi computer

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I created a relay block for fuel pump and injector power. I used the original coil + wire (on when the key is on) to turn the relays on. You can get a nice sub panel with fuses from Summit if you want more circuits:

http://www.summitracing.com/parts/prf-70107/overview/

The only tie my EFI has to my rig electrically is the old coil + now.
 
Top