ZF tranny install with J shift t case question on capatability.

[bigmuddy]

Anyone know why Advance would say that the J shift cannot be used with the ZF? Apparently this in the literature and WH corroborated or vice versa?!

At any rate I believe this to be wrong unless there is a chunk of the tranny that is in the way and may need trimmed? What am I missing here, the bolt holes are the same the dimensions are the same, what gives? Internally they are different but that would not be a problem for the ZF/

Anyone install a J shift behind the ZF/

 

[EPB72]

Not sure either first thought would be shifter problems but JB Fab seems to have this covered ,,I;d call Jon and see if he has any input to your question..

https://jb-custom-fabrication.mysho...tick-shifter-nv3550-zf-m5od-aod-clocking-ring

 

[Timmy390]

Jb fab has a specific J shift twin stick for ZF swap.

I plan to use it on my ZF well M5ODR2 swap

Tim

 

[bigmuddy]

So, in full disclosure I have actually installed the J shift behind a ZF and had zero problems. Thanks for the reminder about JB fab.

 

[JB Fab]

In stock and ready to ship, also stocked at most of the Bronco houses.

Part number EB20J T-2

 

[bigmuddy]

Thanks JB.