• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bump steer issues

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I've had a couple instances of "bumping" in front of an oncoming dump truck on a 2 lane road at 50MPH. Plus I've almost ran a couple people off the road. Pretty unnerving! I recently (like 2 days ago) decided it wasn't responsible to even drive anymore.

I have had everything checked out and it appears to be set up correctly. I thought my PS box was fine because it has very little play (like none) but I finally got the truck to an old ford expert and he showed me that the box was tightened up as much as it could be. He is certain the box is bad. So I am about to send mine in to West Texas Off Road to have them rebuild it. $140+shipping and right now they're only at 2-3 days turn around time. Eventually I'm going to upgrade to a 4x4x2 box but for now $140+shipping to solve my problem sounds really good.
 
Last edited by a moderator:
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I don't think it's your steering box. My EB has 2.5" suspension, perfectly parallel trac-bar and drag-link and I get zero bump steer. That said, the steering still isn't perfect, I had my PS box rebuilt and all that really does is take play out from worn parts. That has nothing to do with hitting a bump and darting to one side or the other...

It looks like from your other pics that you're running HD steering links, and already have dropped radius arm brackets. Post a pic of your trac-bar, I suspect it's at a steeper angle than your drag-link... With 4.5" lift, I'm sure you already have a trac-bar drop so maybe you just need is a little more with a trac-bar riser.

yeah I hear you...I think I have wander AND bump steer I guess. I thought they were the same thing because if I hit a bump it will jump out of line really bad, but I don't have to hit a bump for it to "wander" at times. I think my box is bad or going and I think my trac-bar is dropped too low because of the Duff drop bracket AND the dropped pitman arm. This is what I have going and somebody already told me to move the trac-bar up on the right side. I was about to when I talked to this guy who said the box was "tightened down all the way already"...does that sound right/possible?
019b8d41.jpg
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I just tried to raise my trac bar into the stock hole from the duff drop bracket and the bar is too short. Would he have out a shorter bar on when he lifted it and installed the drop bracket? The bar looks old like the truck. Am I doing something wrong?
 

muskrat

Bronco Guru
Joined
Aug 21, 2008
Messages
1,503
I just tried to raise my trac bar into the stock hole from the duff drop bracket and the bar is too short. Would he have out a shorter bar on when he lifted it and installed the drop bracket? The bar looks old like the truck. Am I doing something wrong?

U need an adjustable track bar. When u lift the suspension u sometimes need a longer track bar. I did for a 2.5" lift.

Also, is the drop bracket welded over the old one. If not are the bolts tight? That should be welded for safety.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
U need an adjustable track bar. When u lift the suspension u sometimes need a longer track bar. I did for a 2.5" lift.

Also, is the drop bracket welded over the old one. If not are the bolts tight? That should be welded for safety.

I think you're right. I do need a longer track bar. I got it moved up to the stock location and it's in the right position now and the truck is driving much better, but the axel is way off center now.

Fortunately that drop bracket wasn't welded on so I was able to easily take it off. The PO was a flipper and did everything really half ass. Most of the time this has caused me tremendous frustration but this time his lazy ass worked in my favor!
631DCF7B-57CD-441F-B0CC-A4BB90659D6D-1741-000000F4F1E2F3D6.jpg
 

Jdgephar

Bronco Guru
Joined
Sep 25, 2012
Messages
1,526
Glad it steers better for you! Now get that adjustable track bar, and a good set of bushings.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I feel good about getting the trac bar back in the right position. I also disconnected the pitman arm and re-centered it. For some reason it turns much more to the left than the right.
F88CB912-4EE6-427A-BD91-8B8BF14F8EB9-1741-0000012A79DBE3DC.jpg

FE5E7D21-11AB-4BC9-AF7D-DB0D2F6DCBE6-1741-0000012A7347C66E.jpg


Should I be able to twist the drag link this much by hand? I'm wondering if all this movement is also part of my problem.
7D262FEC-143D-48FB-9BEE-D30D6E1B8D2A-1741-0000012A97CCF781.jpg

1B9C8933-D3C0-4F94-A055-69378CF9294D-1741-0000012A8DF80F01.jpg
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Should I be able to twist the drag link this much by hand? I'm wondering if all this movement is also part of my problem.
Yes, that's normal. The tie rod end is just a ball and socket. It will move in any direction.
 

Attachments

  • Tie-Rod-End.jpg
    Tie-Rod-End.jpg
    60 KB · Views: 82

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I do see a couple of things that don't look right.
The driver's side tie rod end, looks like there are a couple of loose washers between the knuckle and the boot. What is up with that?
Second, look at the adjuster on the tie rod. Make sure there is enough thread engagment. It looks like this is a knuckle swap disk brake conversion (or a T linkage conversion on a disk brake truck) and the adjuster looks to be excessivly unscrewed, that is a LOT of exposed thread. There is a difference in the steering Ford disk brake knuckles that places the linkage holes further apart then the T-style drum brake linkage.

As for centering the steering, that gets interesting. Stock bronco with the wheels straight ahead, the pitman arm points a little to the drivers side. No telling how this is set up. Best answer, pull the pitman arm off the box with the wheels straint. center the box lock to lock. Put the pitman arm on so the wheels are pointing straight. This should get you equeal left and right turns. With this linkage and aftermarket pitman arm, I cannot say how the pitman arm will point to make this work? Maybe off to the side like stock, maybe straight back?
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
I do see a couple of things that don't look right.
The driver's side tie rod end, looks like there are a couple of loose washers between the knuckle and the boot. What is up with that?

I'm not sure, but that's always bothered my too. I need to find some pics of what this SHOULD look like.

Second, look at the adjuster on the tie rod. Make sure there is enough thread engagment. It looks like this is a knuckle swap disk brake conversion (or a T linkage conversion on a disk brake truck) and the adjuster looks to be excessivly unscrewed, that is a LOT of exposed thread. There is a difference in the steering Ford disk brake knuckles that places the linkage holes further apart then the T-style drum brake linkage.

I'm pretty sure this is a T linkage conversion. I've only owned the truck for a few months and am just getting around to fixing all of this. If I were to screw this in wouldn't that adjust the toe in way in? I had the alignment done and told the guy to adjust the toe in to 1/4" and this is how I got her back. I wish I had pics of everything before I had this done.

As for centering the steering, that gets interesting. Stock bronco with the wheels straight ahead, the pitman arm points a little to the drivers side. No telling how this is set up. Best answer, pull the pitman arm off the box with the wheels straint. center the box lock to lock. Put the pitman arm on so the wheels are pointing straight. This should get you equeal left and right turns. With this linkage and aftermarket pitman arm, I cannot say how the pitman arm will point to make this work? Maybe off to the side like stock, maybe straight back?

This is what I did yesterday (pulled pitman, lined up straight, etc.). The pitman ended up pretty much straight back. The problem is it instantly engages when turning to the left, but when I turn to the right it has to push out the slop in the set up before it starts turning the wheels so they end up not turning as much to the right. Does this make sense? I guess I should maybe install the pitman with the wheels turned a bit to the left but the steering wheel at center position (like 2.1 turns). After a couple turns back and forth it should turn the same amount both ways. I feel like I'm losing some turn-ability though. I wonder if it's those tie rod ends?

I was really hoping the alignment shop or other mechanic I've had look at the truck could figure this out, but I guess they aren't that good so I'll do it myself!
 

g8rb8t

Bronco Guru
Joined
Feb 23, 2008
Messages
1,489
Hey Lyle -

Yes it's the WH T conversion for '76/77 I put on (PO to flipper boy). I had a 2.5" suspension lift, no body lift, and 30x9.5" tires. There were no washers or that much thread when I put it on and had it aligned but its sky high now so I'm sure he had to extend/stretch every rod/cable etc. because we know it wasn't done right.

Sorry your hassling with his mess, but seems your making traction. I agree a lower lift will help not max everything out etc.

Let me know if you need anything.

Brad
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
The problem is it instantly engages when turning to the left, but when I turn to the right it has to push out the slop in the set up before it starts turning the wheels so they end up not turning as much to the right.
So, what slop are you talking about? Shouldn't be any slop.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
Hey Lyle -

Yes it's the WH T conversion for '76/77 I put on (PO to flipper boy). I had a 2.5" suspension lift, no body lift, and 30x9.5" tires. There were no washers or that much thread when I put it on and had it aligned but its sky high now so I'm sure he had to extend/stretch every rod/cable etc. because we know it wasn't done right.

Sorry your hassling with his mess, but seems your making traction. I agree a lower lift will help not max everything out etc.

Let me know if you need anything.

Brad

OK good to know. I'm going to go ahead and drop it down to 2.5" if I can. At least 3.5" which I know I can do. I really think that will help me solve and fix these issues. I am gaining traction. Slowly but surely! When I got that trac bar properly aligned Friday night I started feeling it! I'll get her there.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
So, what slop are you talking about? Shouldn't be any slop.

Yeah that's what I thought. When I turn to the left it just instantly starts turning. When I turn to the right it twists the drag link before it starts turning the wheels so I get like a 1/4 turn or so at the wheel before the wheels start to move. That can't be right. I need to have a better steering guy look it over I think. I can probably figure it out, but steering seems important and I hate risking it since my girls ride around with me.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
When I turn to the left it just instantly starts turning. When I turn to the right it twists the drag link before it starts turning the wheels so I get like a 1/4 turn or so at the wheel before the wheels start to move.
Along with all the other things that look wierd... I've never seen a drag link with those bends in it. That might be contributing to the twisting.

Also, you might try rotating the center of the tie rod just a little, so the rod end for the drag link (grease fitting) is pointing up on a 45° angle or so. Seems like that helped me. Will have to loosen both adjusting sleeves on the tie rod, and the sleeve on the drag link. When you're done, the tie rod end stud should be centered in the "socket", not leaned over to one side or the other.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
Along with all the other things that look wierd... I've never seen a drag link with those bends in it. That might be contributing to the twisting.

Also, you might try rotating the center of the tie rod just a little, so the rod end for the drag link (grease fitting) is pointing up on a 45° angle or so. Seems like that helped me. Will have to loosen both adjusting sleeves on the tie rod, and the sleeve on the drag link. When you're done, the tie rod end stud should be centered in the "socket", not leaned over to one side or the other.

Thanks man...I really appreciate it! I'll give that a try. Can't hurt.

I have no idea about the bent drag link. Hopefully I can avoid buying a new steering system. This one worked fine for Brad before Dimitri bought it and and f'd it all up so I should be able to get it back to where it was. I hope!
 

u10072

Bronco Guru
Joined
May 18, 2007
Messages
2,249
This is for sure a 76-77 frame as you can just tell it from the trac-bar mount. Those are for sure 76-77 knuckles and that is almost for sure a 66-75 steering or the T style. The T style will work on the 76-77 knuckle but its not very safe. If you want to help youf steering and make it safer I would do a couple things. 1. add an adjuster to the drivers side to lengthen the tie-rod and bring those threads to a safer distance on the pass side. 2. flip the steering to over the knuckle. 3. raise the tracbar bracket at the axle add your drop tracbar bracket back in if the draglink is flatter still than the tracbar. Doing that will make it steer pretty nice and I seriously doubt you will need the adjustable tracbar after all.

One way to check your steering angles most accurately is to take a picture of the steering, and look at it on your computer screen. Then take a pice of paper and hold it up and compare the angles. You compare the angles at the attachment points not the angles of the bars. They theoretically could be in a Z shape and its the attachment points that actually matter. Blame the Persians I think for that :) You want them both pretty darn flat and running parallel to each other. If they are off like when you had the trac bar bracket on its going to drive extremely twitchy to say the least. I wouldnt worry about the steering box just yet as you are having a classic geometry issue.
 
OP
OP
J

jlylec

Sr. Member
Joined
Jul 5, 2012
Messages
891
This is for sure a 76-77 frame as you can just tell it from the trac-bar mount. Those are for sure 76-77 knuckles and that is almost for sure a 66-75 steering or the T style. The T style will work on the 76-77 knuckle but its not very safe. If you want to help youf steering and make it safer I would do a couple things. 1. add an adjuster to the drivers side to lengthen the tie-rod and bring those threads to a safer distance on the pass side. 2. flip the steering to over the knuckle. 3. raise the tracbar bracket at the axle add your drop tracbar bracket back in if the draglink is flatter still than the tracbar. Doing that will make it steer pretty nice and I seriously doubt you will need the adjustable tracbar after all.

One way to check your steering angles most accurately is to take a picture of the steering, and look at it on your computer screen. Then take a pice of paper and hold it up and compare the angles. You compare the angles at the attachment points not the angles of the bars. They theoretically could be in a Z shape and its the attachment points that actually matter. Blame the Persians I think for that :) You want them both pretty darn flat and running parallel to each other. If they are off like when you had the trac bar bracket on its going to drive extremely twitchy to say the least. I wouldnt worry about the steering box just yet as you are having a classic geometry issue.

Thanks for this. I think this is good advice. At this point I'm going to get the new springs, shocks, and coils to lower the truck first. No sense in doing all these adjustments and they having to redo them once I get it lowered! Hopefully I can get that done really soon. I'm trying to decide what exactly to buy and who to buy it all from, but plan on pulling the trigger this week.

This is the steering setup, does not require reaming as its made for the 76/77.

Thanks Brad...I saw that one day when I was looking at WH and was wondering if it was what I had. Looked very similar. Thanks for confirming!
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
So, what slop are you talking about? Shouldn't be any slop.

I think the box needs to be centered as one of the others said. You have to find that center position in the box then install the pitman arm with the wheels straight. Some pitman arms have a keyway that needs to be filed down to allow you to put the arm exactly where you want it.
It's been twenty years but I think that is what I did. Haha
With the box centered you'll have equal eb steering slop in each direction, enjoy.
 
Top