desertguy76
New Member
I have searched this forum up and down and everybody has different original set-ups leaving me with a couple questions. I have a stock early 302 with holley sniper, 3 speed trans and a T shift dana 20 currently. I have started sourcing parts to control costs and then I plan on having the conversion done by a local shop once I have everything. I have never attempted anything like this and want to make sure it is done right.
Parts I currently have
- Flaming River tilt w/ column shift
- Lokar linkage
- Lokar dip stick
- wild horses 1" body lift
Parts needed and questions
- Planning on getting a core from car-part to have rebuilt
- Adapter- There seems to be two different part numbers is this adapter the one I need? https://shop.broncograveyard.com/AODE_4R70W-Swap-Kit/productinfo/11325/
- Do I need a clocking ring?
- Will a remote oil cooler with fan be suffice to keep trans cool? I don't want to change the radiator out yet because eventually I want to add a serpentine kit. I thought it may be beneficial to change to reverse inlet/outlets to make for a cleaner install at that time
- With the T-shift is there a benefit or need to go to twin sticks?
- Is baumann still the most popular controller?
- What flex plate do I need?
- Am I missing any other part that I should provide vs. having the shop source?
Thanks for any help you can provide I hope to source the remainder of the parts in next couple weeks and have complete to enjoy by summer.
Parts I currently have
- Flaming River tilt w/ column shift
- Lokar linkage
- Lokar dip stick
- wild horses 1" body lift
Parts needed and questions
- Planning on getting a core from car-part to have rebuilt
- Adapter- There seems to be two different part numbers is this adapter the one I need? https://shop.broncograveyard.com/AODE_4R70W-Swap-Kit/productinfo/11325/
- Do I need a clocking ring?
- Will a remote oil cooler with fan be suffice to keep trans cool? I don't want to change the radiator out yet because eventually I want to add a serpentine kit. I thought it may be beneficial to change to reverse inlet/outlets to make for a cleaner install at that time
- With the T-shift is there a benefit or need to go to twin sticks?
- Is baumann still the most popular controller?
- What flex plate do I need?
- Am I missing any other part that I should provide vs. having the shop source?
Thanks for any help you can provide I hope to source the remainder of the parts in next couple weeks and have complete to enjoy by summer.











