Put the twin stick knobs on the son in laws rig. Even though the silver paint marker floor pan marks was working just fine. Lol We up town now. And I picked up some 3/8 self tappers to get the skid plate attached.
I got my engine back from Blueprint. somehow one of the small screws from my airbreather got sucked into the intake while it was running. it scored the cylinder, damaged the head and wiped a cam lobe. Blueprint rebuilt it under warranty. I told them this was obviously my fault, not a manufacturers defect, and they told me " everyone gets one" since they are only about 3 hours away I hauled it to them and back in my truck so it cost me nothing. amazing I don't really understand it, but I am happy to have my bronco back it took quite a while with the back order on parts, and I missed the Moab show, but I am still very pleased with Blueprint engines. I got the engine in over the weekend. working by myself. and last night I corrected a couple minor issues and had my first successful test drive. now to do some driving and let the snipers learn!!
Awesome, so what is the plan for the old tires and rims?
Well this bit of fun a while back, lead to needing one of these fancy gas tank skid plates. And when I installed the new bumpers, I mounted them (with the tubing going way inside the frame rails). So I go to mount it today and realized I have to go thru the old skid plate frame mount holes and drill into the tubing I inserted a while back. I need an inverted drill press...One step fwd, one step back.
Well this bit of fun a while back, lead to needing one of these fancy gas tank skid plates. And when I installed the new bumpers, I mounted them (with the tubing going way inside the frame rails). So I go to mount it today and realized I have to go thru the old skid plate frame mount holes and drill into the tubing I inserted a while back. I need an inverted drill press...One step fwd, one step back.
Installed the WH saginaw p/s pump bracket stiffing bolt. (In the head and then thru the pump and bracket). That was an easy way to brace the bracket that kept flexing on me.
Then did the easy way to drill thru the frame rail to change up the steering stabilizer mount bracket placement. Installed new WH steering stabilizer shock.
Then used that same idea to drill thru the WH skid plate, the frame and the tubing inside the frame rails. And then did the finial install of the skid plate. The OEM skid plate bolt holes were wallered out. That is why I had to drill new ones.
Noticed that the skid plate fell a little short on the front part (of the gas tank) and left the front edge of the gas tank exposed.
So I grabbed a spare piece of aluminium plating (that had a weird sticker on it) and got the rest of the tank protected easy enough.
Added some muffler turn downs/extensions to stop heat soaking my gas tank. Waiting on the darkness to finish the rock light install.
Ring and pinion was making noise. Took it out and the R&P was wore out bad. Not sure what I screwed up to do that but I built it about 12 years ago.
Put in a new Richmond gear, Strange N housing and Daytona pinion support. Hopefully good now.






