• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
I’m installing some progressive coils from WH. Gonna give them a try…..
da978daaeedd39768605e768f246d308.jpg

e2c7ce52d1b2458923906daaacc2ae13.jpg
 

mdainsd

Contributor
Full Member
Joined
Mar 16, 2025
Messages
263
Loc.
San Diego
Part of today was paying attention to the spare tire carrier for Project 74. I could have just bought an un butchered one, but I want the one that came on the vehicle to go back on. After all its just time, sweat and a couple of bucks worth of wheels.

In all its modified glory:

IMG_2859.jpg

Getting to grinding:

IMG_2860.jpg

And finish up with flapper wheel:

IMG_2862.jpg
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
85 miles one way to the beach....truck ran great! Lots of comments and pics taken, feels so weird! Thanks Migs!!! GET OUT AND DRIVE THEM PEOPLE!!
00-NfmewEdBZpaPKHQAw15duo37JUqllZL3YGr4_whos6ZzDW-Gt2v7w0kSEaXRXhhpVZV51t4MhjbEwRNyGscOgg.jpg
 

Attachments

  • 00-NfmewEdBZpaPKHQAw15duo37JUqllZL3YGr4_whos6Yn-mts_DImsR8A47Ykw7ycV7ntXQOewWgszVPDOQPWWw.jpg
    00-NfmewEdBZpaPKHQAw15duo37JUqllZL3YGr4_whos6Yn-mts_DImsR8A47Ykw7ycV7ntXQOewWgszVPDOQPWWw.jpg
    134.1 KB · Views: 67
Last edited:

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
I still have a few things to take care of before it goes to paint. Welded the clutch hole in the floor, going with a 4R70w so I don't need it, as well as several other holes I found that are not necessary. My 67 didn't come with a passenger mirror, so I installed one. It is an early 67, so I though the driver side mirror would have 66-67 hole spacing. The 67 specific mirrors didn't fit, measured and found the holes matched for 68 and later. With 2 new 68-77 mirrors, the driver side fit perfectly with the factory nutserts, they are still holding strong with no wiggle. Used nutserts on the passenger side and am very happy with the result. I also had to fabricate a rear front fender brace for a 67 fender attaching to a later year kick panel. The early fenders have 2 braces in the rear and the later ones had only 1. Just waiting on my cage so I can send everything to the paint shop.
20250724_093802[1].jpg

20250725_181518[2].jpg

20250723_104811[1].jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Coming right along!
What month was your 67 built in? Maybe we can track it as a late model change between the early and late mirror spacing.
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Got my new WH axles installed with SS hard brake lines and new shoes. I dreaded doing the rear brakes but if you figure out every way NOT to do them first... by the fifth time, you get it. The driveshaft had a broken center yoke so that was replaced along with all the u-joints and then a balance. All good now.
IMG_4103.JPG
 

Jwredneck

Full Member
Joined
Feb 23, 2010
Messages
162
Loc.
Edgewood,Wa
Now that I got my new springs installed, I’m pulling the axle out. It’s gonna get new C-bushings, bearings, ball joints, and a fresh coat of paint. Then I’ll put those new springs back in again.
I just gotta fit a few more jackstands under there.
emoji3526.png

277564010fc382b8cc7db855d783a755.jpg
I used a harbor freight furniture dolley and some 4x4 blocks screwed together with a V notch to wheel mine in and out recently.
1000021414.jpg
 

abn373

Contributor
Sr. Member
Joined
Jan 6, 2012
Messages
420
Loc.
Charleston, SC
Got my new WH axles installed with SS hard brake lines and new shoes. I dreaded doing the rear brakes but if you figure out every way NOT to do them first... by the fifth time, you get it. The driveshaft had a broken center yoke so that was replaced along with all the u-joints and then a balance. All good now. View attachment 948259
Me too. Upgraded to 31 spline.


1000016962.jpg
1000016740.jpg
1000016890.jpg
 
Last edited:
Top