• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Need Photo of stock 2 to 1 exhaust routing

    I've considered the CJ Pony Parts replacement of the stock exhaust system, but I can only see using the front section. So in effect I'd be paying 400 bucks for that part. I never liked the round mufflers Ford used on EBs and most all 4.9, 5.0, and 5.8 light trucks. They're too loud. The tail...
  2. J

    Duff's 351W coversion oil pan

    Some of us in the EB community for 50+ years remember the 351W conversion oil pans by James Duff that modified EB 289/302 oil pans to work on 351Ws. I'm doing that right now and have encountered some unforeseen obstacles with the oil pump fitment. Does anyone have 1st hand experience with the...
  3. J

    '77 Silicone heater hoses

    I need 2 long silicone hoses with 90 degree bends at one end for an OE '77 heater hose set up. The EB vendors only have heater hose kits that are for the earlier models. These kits have 1 long hose that I need 2 of. The other 2 hoses include one short one and another with 2 bends to place the...
  4. J

    ID of hole in the dash

    There is a small maybe 1/8" hole in the middle of '73-'77 original dash. It's about 1 1/2" above the heater controls. There's a threaded nut? welded to the back side of the dash panel. All I can think of is a mounting location for a compass.
  5. J

    AZ Late fuse box mounting hard ware.

    Original fuse box mounting hard ware to the side of the glove box. A knuckle head at the shop tossed the fuse box mounting gusset plates. They are black square steel sheet metal pieces with a hole in the middle shaped like the fuse box, with 2 screws holding them together. Name your price. I...
  6. J

    Original Fuse Box in Glove Box

    I'm installing the OE fuse box in a new glove compartment with no mounting hardware. The original glove compartment got wet, soggy, and literally fell out. The fuse box is still on the wiring harness but that's all I have of the original. I got a new far stronger glove compartment and there are...
  7. J

    Stock Type 2 to 1 Exhaust System

    Looking for a reproduction of the stock 2 to 1 exhaust. There seems to be none of the vendors willing to offer anything that even looks like the OE exhaust system. This makes a restoration difficult for no good reason. At this time I can only find CJ Pony Parts offering a stock style system. The...
  8. J

    Hole in Driver's Side A-Piller

    I was asked what the hole near the top of the A-piller was for. Some reference to a temperature sensor for emissions has been mentioned on this forum. I dug into it and found an old Ford 1971 Ford Technical & Service Handbook for the TRS system. Here is page...
  9. J

    Hard Top Interior Panels

    Don't remember who had them or if they were worth it. I do recall white plastic panels that gave the sides of the top a finished look.
  10. J

    Tintable Bed Liner

    Some shops tell me tintable bed liner isn't very durable and won't last. Others say the urethane tintable will hold up well. They do say urethane is more expensive and color matching is difficult. Is there anyone who's had experience with it?
  11. J

    Tintable Bed Liner

    I'm getting contradicting reviews on colored bed liners for the wheel wells. Some say tintable bed liner isn't durable in the way black is, and in fact won't last at all. Others say urethane tintables are durable. The urethane type is just more expensive. Is there any 1st hand experience?
  12. J

    Heat/Sound insulation recommendations

    A small search resulted in a long list with no clear winner. It would seem different types would work best in different parts of our trucks. So what works best in the hood may not be the best on the floor. Also I think the doors should get something water proof. I'm also looking at Lizard Skin.
  13. J

    Original C bushings

    The poly C bushings I have are marked front and rear. The OE rubber bushings don't seem to be. In fact they have the same Ford part number. I always heard the stock suspension C bushings were 2 degree. So if that's true there must be something about the OE bushings that give them what the 2...
  14. J

    C-Bushing Pre-lube Grease and Bronco Lean

    I just noticed the vendors are offering pre-lube grease for installing the C-bushings. Has anyone used it? Does it help to avoid or mitigate the infamous Bronco lean? I'm also curious if rubber or poly are less likely to result in the EB lean?
  15. J

    See EB turn table on HSN

    See it now.
  16. J

    Shift kit removal

    Is there an all inclusive instruction that describes returning a C4 to a pre shift kit condition. A knuckle head bench builder at my local transmission shop puts Transgo Shift kits in ALL his rebuilds without the owner's request, permission ,or knowledge. They call it a shift improver kit. It...
  17. J

    C4 shuttles between 1st and 2nd

    I recall Viper describing a problem with the governor that causes the C4 to shuttle between 1st and 2nd. With mine this happens at low speed with light throttle, as in maneuvering in a parking lot. I can't find that thread or any other dealing with this problem.
  18. J

    Hinge Post Fix by WH

    My frame off by a professional restoration shop ran into a snag replacing the left or driver's side A pillar/hinge post. WH and Tom's are out of the one piece pillars. The manufacturer made a run that turned out to be defective. The one I got moves the door to the rear about 1/4", leaving a huge...
  19. J

    LED instrument panel light feedback

    I've gotten some mixed reviews of LED lights in various applications. The LED headlights work well but the instrument illumination LEDs have been problematic for the builders doing my frame off. I know the household LEDs are constantly improving, so the same may be true of automotive LEDs. The...
  20. J

    Choosing Master Cylinder bore diameter

    My new WH catalog lists both 1" and 1 1/8" master cylinders. The choice is a small 1" for more fluid pressure or the 1 1/8" for more volume. The OE master cylinders were 1". To me the 1" would apply the brakes with more pressure and unless the drum brakes were way out of adjustment, volume...
Top