• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Rebuilding a '77 metering/proportioning valve

    Has anyone rebuilt the Kelsey-Hayes metering and proportioning valve? I'm going to give it a try. The brass replacement seem to have spotty record and I know the OE KH cast iron valve worked well for many years. When the rear wheels started to lock up I knew it was time to rebuild it.
  2. J

    AZ OE radio antenna co-ax hose

    Years ago I bought a new EB antenna at a Ford dealership. Ford didn't include any of the mounting parts or the hose that protects the antenna wire. The mounts available through the vendors but the hose is not. My original is dried out and the vendors don't sell the hose as a separate part. I...
  3. J

    Are the '77 combination valves rebuildable?

    I've seen kits for rebuilding 65-66 Mustang brake metering and proportioning valves but nothing for the truck version. Is it possible to rebuild the OE ones in '76-'77 EBs?
  4. J

    Bushwacker flare feedback

    Has anyone tried the Bushwacker fender flares? They are high dollor and not found at any EB vendor. In spite of that, I would like to know if anyone has any experience with them?
  5. J

    Plastic paint for parchment color seat back

    My '77 hard plastic seat backs are in good shape but the original parchment color paint has worn through in some places. Several manufacturers make plastic paint. I'm looking for the best color match for parchment upholstery. The rear seat arm rests could use new color as well.
  6. J

    76-77 Master Cylinder Interchange

    I have new master cylinder for an unknown application that want to use on my '77, but I don't know the diameter of the OE '77 Bronco master cylinder piston to see if this one is compatible. Is this spec available?
  7. J

    D20 T Shift Cover Reproduction Review

    I've gone through a few original shift covers for the T-shift D20s. The plastic slider cracks and breaks in two. The rest of the cover seems to hold up OK. Other than this one part, I like the T-shift. Have the reproductions overcome this problem? It would be good and more affordable if the...
  8. J

    Nitrogen Hood Shocks recommendations

    When going to hood shocks (nitrogen cylinders), for my steel hood, what do I need to know before ordering?
  9. J

    1977 Ford Color Chart

    I want an accurate chart of '77 Ford truck colors with real chips. Is there any way to buy one? The ones I see by doing searches aren't of the same quality as the chip selection I got from Sherwin-Williams automotive division. I'm hoping to use actual factory colors.
  10. J

    Fuel Tank Selector Valve Rebuild

    My fuel tank selector valve leaks. It looks like the correct O ring would fix it. What kind of O ring is that? The O-ring would have to be fuel resistant. I can't find anything on the vendor sites.
  11. J

    '76-'77 Track bar bracket for earlier frame

    I'm putting a '76-'77 inverted Y tie rod system on a '66-'75 frame. I need to either move the track bar bracket from the '77 frame or fabricate one. I would prefer to move the original. Has anyone done that? How? There isn't much room between the track bar bracket and the spring bucket. Not...
  12. J

    '78 to '77 Steering Colomn Swap Wiring

    My '78 steering column has a different color code than the '77 harness. Has anyone swapped a '78 column into a late specifically '77 EB with an auto trans and got the wiring figured out? The semi circular plugs are the same so it's just a matter of putting the pins in the right positions.
  13. J

    Bushwacker flare durabillity

    The Bushwacker flares look good when new. How well do they hold up over time and exposed to desert sun? The sun here in Az. eats tires. Can urethane flares take it?
  14. J

    AZ '77 Main Tank Filler hose

    My '77 is going through professional frame off restoration. Yesterday I noticed the main fuel tank filler hose was cut to remove it. Now I need a replacement. These are hard to find.
  15. J

    1978 Bronco steering column diagram needed

    I found a good auto trans '78 column for my '77. It's not a tilt, as I don't want another place to get loose. I welded an EB securing bracket in the '77 position and now am ready to re-assemble it. A diagram would be most helpful, but I can't find one. My searches seem to give me only the tilt...
  16. J

    Trying to reach frenchy

    frenchy was selling sets of heavy duty rubber body mounts, but he doesn't answer my PM. Is he still on the forum? Does he still sell his rubber body mounts?
  17. J

    '77 Frame Off as a spectator sport

    My '77 is being restored at Hot Rods, in Vail, Az. at 10500 Old Vail Rd. south east of Tucson. They have a bar/restaurant on the second floor, with windows over the shop area. Come, watch, have a beer, and tell me if you think I'm blowing it. I will welcome helpful suggestions too.
  18. J

    Rear Quarter Interior Treatment

    The Ranger package had padded vinyl upholstery covering the interior of the rear quarters. If memory serves me, the backing was cardboard similar to the head liner. I'm thinking steel or aluminum sheet metal backing for carpet that matches the kit color would be more durable. It would also be a...
  19. J

    Building a 393 low end torque engine

    My 351 is getting a new top end and cam. If it turns out to need re-bore, pistons, etc., this may be a good time to do a 3.85" stroke crank. My goal is building a great TRUCK engine. This is an entirely different concept than building a race, performance, or hot rod engine. Trucks need a...
  20. J

    Crown Vic 351 oil pan and hit by axle

    I'm having a frame off done and want to know where the D44 axle hits the 351 Crown Vic pan, when the front end bottoms out. I seem to remember the banjo hits the front left corner of the rear sump. Is that true? If so how do I modify the pan to avoid an oil leek?
Top