• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Need Stock '77 Track Bar Bushings

    My OE track bar bushings lasted about 25 yrs. The poly replacements went about 1/3 as long. I'd like some of the OE rubber type, but have had no luck finding any. Even Moog, is now selling the same poly bushings as speed shops or Pep Boys. The only good thing about them is the low price. If I...
  2. J

    How To Put Nuts Inside the Frame?

    I'm putting a '77 main fuel tank/skid plate on an earlier frame that doesn't have the 9 nuts welded inside the frame. My searches have only came up with rivet nuts. I also know later Fords used tapered self threading bolts where no weld nuts were present. These were used mostly to secure exhaust...
  3. J

    '77 Main fuel sending unit repair

    The real question is, can the '77 main tank sending unit be replaced without dropping the tank. I dropped it when cleaning rust ect. out of the tank about 25 yrs. ago. It was a real PITA. If replacing the fuel filled float can be done without dropping the tank it would make the job a lot less...
  4. J

    4100-2100 high Level Rebuild

    This the most thorough, informative, 4100 rebuild info I know of Author Reply Bill White (no login) 71.227.216.65 Howard, You win the prize....... No score for this post September 26 2007, 1:35 AM For the best question ever!!!!! For the last 6-8 years I have been wondering this same thing...
  5. J

    Autolite 4100,2100 carb rebuilding

    In researching the best 4100 for my 351, I found this in depth 4100-2100 rebuilding description that pushes this job to perfection. The author is a gentleman named Bill White, who posted on the network 54 Ed's Carburetor Forum about 10 yrs. ago. I can't find anything done recently by him. The...
  6. J

    OE steering column color match

    The OE color is a semi gloss dark grey that's almost metallic. The closest I could find is semi gloss black, that matches the pebble grain bezel on the dash. Is there a rattle can match for the OE color? Something that's durable would be good too.
  7. J

    OE steering column color match

    I just checked the rattle can selection at Pep Boys and can't find a good match for the dark grey semi gloss paint, Ford used on the OE steering column. It's almost a metallic look. The best I could do is semi gloss black. Most of us have seen it, so I won't try to further define it.
  8. J

    Advice soldering a rectifier plate in a G3

    I'm having trouble soldering the 6 joints in my G3 alternator after a diode burned out. My Weller soldering gun isn't big enough for this job, and a torch would burn the backing board.
  9. J

    Building V8 That Works Like a 300 I6

    Many hundreds of thousands of miles in 300 I6 trucks proved it to be the best truck engine Ford built. The pre '72 302 worked well in 2700 lb. Mustangs, but in trucks it fell far short of the 300. The 302 had more HP (205 at 4600 vs. 170 at 3800) and more torque (300 ft.lb. at 2600 vs, 283 at...
  10. J

    Fixing quarter panel spread

    After temporarily pulling the top to replace the windshield frame, I noticed the top of the rear quarter panels had spread out at the top. Of course the bottom of the top had spread out with the quarter panels. Why this happens is hard to say. The weight of the top, is the only reason I can see...
  11. J

    Need source of new liftgate striker plates

    Is there anyone making or repairing the lift-gate striker plates? Mine have a deep notches from many years of the latch wearing the hole. A welding bead to fill it is all I can see as a repair.
  12. J

    AZ OE oil pan modified to work with 351

    Duff's sold 289-302 early Bronco oil pans, in the '70s, with a section of a 351 pan, at the rear main bearing cap, welded in making it work on a 351. I would prefer this to the '80s 351-5.8 Crown Vic dual sump pan, sold now for 351 engine swaps.
  13. J

    265/75R15 vs. 31X10.50R15

    Is there any advantage of one vs. the other? The specifications are very close, but the 265/75R15 seems to be a little less of a floatation tire, with a narrower tread. It may offer less rolling resistance for better MPGs. The Bronco came with L78X15s that handled better on pavement than the...
  14. J

    The Pull a Part here just got a '96 Explorer

    I've been hitting the Tucson Pull-A-Part every other day getting parts for my wife's Grand Marquis. Today I noticed a '96 Explorer with a 5.0 and 4R70W. I already have '96 GT40 heads and prefer the C4, so I won't need anything off it. I know somebody must want these parts.
  15. J

    Found a Hood Louvering svc. in Pheonix

    A fellow worker has great looking louvers on his CJ5, he got from Poison Spyder that would look great on an EB. So I started looking at their products and Hyline's. Again they look great but louvers stamped or pressed into the steel hood would look better without weakening it. A Hot Rod shop...
  16. J

    How to install OE overflow tank with hood shocks

    My '77 came with no coolant recovery tank, so want add one to my cooling system. The top of the wheel tub has dimples where the factory would have drilled the hold down stud holes. They put the tank in a sideways position that leaves no room for hood shocks and kink the hose to avoid the air...
  17. J

    Lowest Percentage of Antifreeze to stop corrosion

    It's well known that antifreeze can't cool an engine as well as water. The main purpose of antifreeze is of coarse to keep the coolant from freezing, but in the summer for most drivers, and all year here in Tucson, freezing won't happen. Over heating is the main issue. Some antifreeze is needed...
  18. J

    289 HiPo 4100 for a good price

    This is one of those barn find carbs. http://www.ebay.com/itm/Ford-289-4100-4-Barrel-Automatic-Carburetor-C4gf-Af-/251909532454?hash=item3aa6fa6b26&vxp=mtr The seller apparently doesn't know how rare these are.
  19. J

    Another Great Deal on a 289 4100

    This is a '65 289 1.08 venturi 4100 in good condition for a great price. I can't think of a better choice for a 302 EB. The throttle shaft would need to be swapped for a automatic type from a 2100 if it was going into an automatic Bronco as it is from a 4 speed Mustang. Over the years I've heard...
  20. J

    Found a great deal on a 4100

    The ebey auction below is a '65 289 1.08 or 480 CFM 4100 in excellent condition for a super price (so far). I have a 1.08 4100 or I would snap this up. http://www.ebay.com/itm/271745987745?_trksid=p2055119.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT
Top