• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Cracked Block. Options?

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Well guys it looks like the joy of getting the Bronco out of storage is short lived. Went to pull the engine to do a quick flywheel change and freshen up, and found a nice big crack in between the two freeze plugs under the motor mount.

It was in storage for almost a decade and I went up periodically to add antifreeze and check on it, but I guess the antifreeze wasn't getting into the block.

Anyway I'm looking for options. from what I've read it looks like I've got three choices.

1. Crate engine. This is what I'm leaning towards right now because I am getting tired of broken things. It would be nice to have something new and reliable. If I choose this option I would do what I'm calling a mini restoration which would be, new bushings, bearings, seals, mounts, and wiring harness. as well as refurbishing the parts that might need it. Excludes paint or body work or interior. This option would be a 2 or 3 year timeline, but would leave me with the nicest finished product by far.

2. Find a block and a shop to swap the internals and rebuild. This doesn't seem like a bad option but I worry about finding a reputable shop to give my money to. Anyone in Northern OK have suggestions?

3. Find a block and attempt to do the internals swap myself. I would love to learn how to do this, but it seems daunting.

Thanks in advance!
 

Attachments

  • Crack in Block-1.jpg
    Crack in Block-1.jpg
    149.5 KB · Views: 235
  • Crack in Block-2.jpg
    Crack in Block-2.jpg
    145.5 KB · Views: 237
  • Windshield Down.jpg
    Windshield Down.jpg
    126.3 KB · Views: 254

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
Doing the swap yourself isn’t that hard. As long as you have a good tool bench and a decent set of tools. But I like option one, having a new motor with a warranty just sounds better


Sent from my iPhone using Tapatalk Pro
 

luke

Sr. Member
Joined
Sep 19, 2010
Messages
370
Buy a 1998-02 v8 explorer for $300-$1500. You can then convert to efi or convert the roller 302 back to carb by swapping the timing cover. Best way to get a cheap running 302 these days.
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Wouldn’t I be dealing with other stuff at that point? Deferent pulley setups? Clutch linkage issues? Mech fuel pump provisions?
 

omureebe

Contributor
Sr. Member
Joined
Jun 18, 2013
Messages
419
I've both bought a short block and finished it myself, as well as take a block to the machine shop for cleanup and installing the rotating balanced assembly there, finished it myself....Fun. Boxed has been checked. Next one will be a crate engine - I proved to myself I can do it (not without significant time), and rather focus on everything else I need to do to get the Bronco on the road and reliable before I die.
 

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
My preference is the Explorer swap option with the serp front dress, but you would need to change out the radiator. Pick up a used one with a good motor so you don't have to replace all the bolt-ons, then scrap the body and get a little cash back.

If you want to stay old school, go grab a rebuilt short block motor from a reputable shop with a warranty (they're usually short like 6 months, but still a warranty). You could swap it out in a weekend.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Man there is a lot of incorrect information about the Explorer swap.

You do NOT have to change out the radiator. There are hoses that will work. And there you still have options, the muffler pipe solution or the 7.3 powerstroke lower hose option.

You do NOT have to change the timing cover. In fact I would recommend using the Explorer accessory drive. It has a good clutched fan that is capable of keeping the Bronco cool. A good modern alternator. Power steering and air conditioning. The stock parts work pretty good and if you want there are upgrades as well. The only thing you loose with the Explorer is the ability to run a mechanical pump. If you run EFI, not an issue. Put a carbed intake on, ok you will need an electrical pump.
 

Calibronc66

Full Member
Joined
Dec 15, 2016
Messages
253
Had this same question about four months ago went and looked at three explorer motors all had over 120k and looked tired and worn. Then I tried to get a local builder and he wouldn’t call back took forever to even get a quote. Decided to go with blueprints 306max bronco motor still getting it ready to drop in the bronco.

984422ce6380fd4fe6ca505aa1d89f42.jpg



Sent from my iPhone using Tapatalk
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Had this same question about four months ago went and looked at three explorer motors all had over 120k and looked tired and worn. Then I tried to get a local builder and he wouldn’t call back took forever to even get a quote. Decided to go with blueprints 306max bronco motor still getting it ready to drop in the bronco.

984422ce6380fd4fe6ca505aa1d89f42.jpg



Exact one I was looking at. Would be a lot of saving and waiting. Sure is a good looking setup though.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Man there is a lot of incorrect information about the Explorer swap.

You do NOT have to change out the radiator. There are hoses that will work. And there you still have options, the muffler pipe solution or the 7.3 powerstroke lower hose option.

You do NOT have to change the timing cover. In fact I would recommend using the Explorer accessory drive. It has a good clutched fan that is capable of keeping the Bronco cool. A good modern alternator. Power steering and air conditioning. The stock parts work pretty good and if you want there are upgrades as well. The only thing you loose with the Explorer is the ability to run a mechanical pump. If you run EFI, not an issue. Put a carbed intake on, ok you will need an electrical pump.

Thank you for dispelling the incorrect info... You beat me to it.
 
Last edited:

hammer189

Full Member
Joined
Jan 13, 2013
Messages
339
Loc.
South Atlanta
Just got my junkyard 96' explorer rebuild running. Machining done at a shop. I put it together. With you tube was relatively easy to do. Runs great and pulls hard. Next time I'm going to do a crate engine. 306 or 347. If you want to build an engine then do it. If you just want to drive your bronco then crate motor is the way to go. $ is very close. Motor shown above is a good choice.
Good luck, David
 
Top