I’m not working on a bronco but 1967 mustang with t5 manual. Watched all the videos and read all the threads I could find and still have some wiring questions. This seems to be the place to go:
1. With manual why would I need to keep vss if I’m using a gps or cable speedo?
2 same with the reverse lights why would I keep these wires?
3. Egr delete- do I just backtrack the large plug and delete wiring or?
4. Why use the Solonoid hot side vs having a central positive lug lug and just a trigger to the starter?
5. Has anyone used forscan or other to code for the manual trans?
The engine is a 97 so no PATS. I didn’t get the trans harness and can’t find a diagram of that connector with the pins to help speed the clean up of that part.
1. With manual why would I need to keep vss if I’m using a gps or cable speedo?
2 same with the reverse lights why would I keep these wires?
3. Egr delete- do I just backtrack the large plug and delete wiring or?
4. Why use the Solonoid hot side vs having a central positive lug lug and just a trigger to the starter?
5. Has anyone used forscan or other to code for the manual trans?
The engine is a 97 so no PATS. I didn’t get the trans harness and can’t find a diagram of that connector with the pins to help speed the clean up of that part.











