Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Please keep us updated on the timing. I love the thought of removing extra boxes under the hood, if the FiTech EFI system can handle managing the spark.
Has anyone received their order or had any other correspondence with them? I was told they were shipping the Fuel Command Centers last week. I am waiting on the matte black EFI which was also on backorder so my order is supposed to ship this week.
Nice! Glad they are starting to get things shipped out. I was hoping my stuff would be here by Friday so that I would be able to get it together this weekend. Doesn't look like I'll have it until next week though.
I called Karen today to check on my order and it fell thru the cracks and didn't ship. She apologized explaining there were 80 or so back ordered and mine was lost in the mix. She offered to expedite shipment but when she found out it would cost her $140 she backed off. Maybe be here by Tuesday. If you have one on order it wouldn't hurt to call and get a tracking #. Sucks
Mainsail09, thanks for the heads up. I wish I had checked the thread earlier. It would have been nice to made sure I hadn't slipped through the cracks today instead of tomorrow. Which throttle body did you order?
Just check Caren's email with tracking numbers and she stepped up and sent them 2nd day!! Should be able to have it running this weekend. I'll keep you posted. Caren took a huge PR negative and turns it into a real positive.
Yeah, I'll have to call her. I ordered the black one as well and haven't received an email and I've been waiting over a month on mine. Glad they took care of you snd sent it 2-day man!
I talked to Caren yesterday and she assured me my Fuel Command Center and throttle body would be shipped and I would have a tracking number no later than today. I was a little frustrated because I hadn't received anything from them. Just as I was typing this message I got a notification I had an email and sure enough it was from Caren with my tracking numbers! Can't wait until they get here so I can get the bronco back on the road as my daily driver!
Mine was here when I got home last night. Caren shipped it 2nd day on her dime! Kudos to Caren!
Anyone find a good spot for the FCC? Will it fit between the driver side firewall and wheel well?
Looks like mine will be here Thursday, she didn't ship mine 2nd day. I had planned on installing mine where you are talking about trying to put yours I won't really know until I get it though. Good luck with the install!
Best place I could find to mount the Command Center was on the drivers side of the core support.
I will have to go outside and take a look, but I don't think it will fit behind the wheel well on mine if mounted on the firewall. I know later models have a different fender that clears power brakes. Might make a difference. I mounted my Duraspark module in that place.
It won't fit behind the wheel well but I found the same spot on the core support. Makes for a really clean install. I was going to install it today but had to help my son with his farm before the monsoons set in. I will jump on it Monday and post pics.
My order was scheduled to be delivered Thursday, just checked the tracking # and it is 2 days early and will be here tomorrow! Looks like I will be leaving work a little early if fedex runs as early as they normally do tomorrow.
Got my command center back last night. Looks brand new!!! Really messed the top up at OCBR trying to get it apart. Having the right tool at the right time is sometimes priceless. FITECH, replaced the burned up fuel pump, modified the RollOver check valve per design change, and fixed my top where it looks brand new, they also paid for shipping!!!
I emailed Bryce about my Command Center having the vent fix. Is the modification just the punch marks inside the vent port? Just checking to avoid the problems you experienced at OCBR.
I'm not sure what the actual fix is. When I was at OCBR and talked to Ken over the phone, he mentioned using a punch to give more clearance for the check ball. I thought that was kind of a trail fix. I assumed they milled something out, he did say they had the same problem on a road race car they were doing some testing with. After that they came up with a design change to give the check ball more clearance because the tolerances were too tight. Pressure from the command center was able to levitate the check ball closed. That's what caused all my problems. The pressure building up in the command center Was preventing the mechanical pump from filling the resivour with fuel. Burned up my electric pump.. Ken said I was the first customer to have the issue. I just hope it's fixed. I also had a problem with the harness plug. The power pin was making a poor connection in the plug. Sort of melted the female connector. They replaced that also. I just have to wire that back up. Didn't get a chance today, maybe tomorrow.