• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

temp sender help

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
I am just winding up my explorer 5.0 swap and cant get my temp gauge to work. i am using what oriely is giving me as a factory sender for a 74 bronco. I have grounded the wire at sender and gauge pegs out. but gauge will not move when connected to sender. i have tried two new senders with same result. i don't know if it would work anyways without being grounded but i even took it out and put it in a cup of boiling water while connected to guage and still nothing. im not sure what to try now. thanks
 

BRONCROB

Bronco Guru
Joined
Nov 24, 2010
Messages
1,613
Loc.
WISNER LA.
What are you sealing it with?It sounds like it is not getting a good ground.And yes a ground is needed to function.Get it warm and touch a ground to the sender body and see what you get.
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
yea i thought that was probably the case. it came with Teflon tape on it. i just tried clamping a wire to the body of sender and running it straight to neg battery post. with sender in hot water (just off the stove boiling) still no movement of gauge.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Sounds like you may have the sender for a warning light instead of a gauge.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I am going for the warning light sender instead of the gauge sender. The reference material at the parts store shows that both were available. What part number did they sell you?
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
does anyone have the part number for the correct one for the guage so i can check to see if i have the right one. the part store says they only show one
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Googling that part number looks like it is a gauge sending unit.
Does the factory oil pressure gauge work?
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
yes oil pressure and fuel both work. thanks for ya'll trying to help e figure this out. its just got me puzzled....
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Here is the temp sender box from the grave yard. Works fine now that I have it in a good spot.[just got done fighting mine today. After 12 rounds, I won! (By tko)

u5u3yjur.jpg
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
im thinking it may be a light sender also but all the local part stores are only showing this sender for a 74 bronco. i really was wanting to get one local and not have to wait a week to come from accross the country from one of the vendors. one of the guys at advanced looked up the sender that came with a guage and it was a different part number. it supposed to be here tommrow. it seems like every part i need is always some goat roping trying to get it%) thanks again!
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
on BWD website which is the brand sensor am using. I cross reffrenced the part number on blue bastard's box and it came up with the WT386, which is what i am using unsucessfully now. then i crossed the napa part number and it is a BWD #WT324. it says its fo 66-69. why would the twmp sender be different for those years? guess it would be worth a shot
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
i hate to bring this back up but i still have not been able to get my gauge to work. im really at a loss as to what to try next. i have tried two new senders. my gauge was working with my old 302 so i took the sender out of it and tried it. it also will not work. i thought maybe my manifold wasn't getting a good ground for some reason but if i i touch the connector to sender to the manifold the gauge pegs out. fuel and oil pressure seem to work fine. no teflon tape on sender. i have cleaned the connection well and made sure it is tight. i am getting anywhere from 0 to 6.something v at the connector and behind the gauge. any advise would be greatly appreciated. i dont know what else to try. thanks a lot guys.
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
Is the sender touching water? Meaning is the coolant level at that sender high enough to contact the sender? I'm reaching here as I can't think what Else to have you try?
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
yes it has thermostat and there has been coolant touching the sender every time i have taken one out to try another one. the fan clutch was locked up and i couldn't ever get the motor hot enough to open the thermostat. every time i shot it with the temp gun the hottest it would get is 180, which gauge in dash still hadn't moved. i got a new fan clutch put in today and now t-stat is opening but still nothing on gauge. I don't get it??? its probably going to end up being something stupid simple.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Put the oil sender wire on the temp sender and see if it indicates on the oil gauge. You know that gauge and wire is good.
 
Top