What have you done to your Bronco today?

[Hultzger]

Tough to look at long. At least from here. Haha



Enjoy

Maybe this is easier for you to look at. I also enjoyed this view when I was there. Maybe it should be in the sightings thread, but so be it.

Sent from my iPhone using Tapatalk

 

[rspd505]

This. I did this.

 

[mustanggarage]

2nd car show and first trophy! Won Best Paint out of 150 cars. Thought we would win Best Classic Truck until this gorgeous blue truck showed up

I guess I am prejudiced. I like yours better. ;D

 

[mustanggarage]

Nice...here it is as viewed from 7000' on Maui. Maunakea on the left, Maunaloa on the right.

awesome photo

 

[jray]

Got a few parts from Tom's and trying to free up the bottom pin on my spare tire rack to remove it and install new bushings

 

[Remos69]

Almost finished the Duff bumper assembly, 2 holes to drill. Door gaskets going on (not me doing it.). Replaced the t-shifter, just ugly. Also replaced brake proportion valve and oil press sensor, both new, both failed...

 

[tasker]

painted the anchor plates and mounted my rear bump stops on my project rig....clean a bunch of junk out of it too!

 

[svastano]

Replaced the oil pressure fitting on the motor side, it was leaking and added my new overflow bottle. Now to wait and see if it is still leaking..... I have been having a bear of a time trying to find the coolant leak. I am not positive that the bottle was the culprit. But at least the new one is pretty. Can't see a drip, even when running but floor gets damp under it when sitting.

 

[sprdv1]

Almost finished the Duff bumper assembly, 2 holes to drill. Door gaskets going on (not me doing it.). Replaced the t-shifter, just ugly. Also replaced brake proportion valve and oil press sensor, both new, both failed...

Nice work....

 

[Evolkid]

Installed a new-to-me manual box and swapped out the OG drag link.

 

[jray]

Replaced a broken headlight adjustment screw.

 

[73azbronco]

Found out the wiper switch, new 3 years ago on the dash is dead, after sitting for 3 years waiting for dash to install, oh well. Not much luck on repop switches, had a bad wiper switch, bad ignition switch, and a bad heater switch. So basically, any repop switch died.

 

[Hazegray]

Almost finished front bumper build w/hidden front hitch receiver. Bought an old F250 rear bumper for $30 and used as platform.

 

[MikeKC130J]

Installed my new 3rd member, upgraded 31 spline axles, and finished the rear 2.5 leaf springs. Oh and replaced entire rear brake assembly.
Apparently I need to put some 35’s on.

 

[73azbronco]

Not seen for 5 years, a dash this close to being in. Just have the heater hoses and cables to finish, minor wire bundle attaching. But man it's fighting every step of the way

 

[56f100bbw]

Sanblasted seat frames

77 bronco Sandblasted seat frames getting ready to go to Upholstery guy ,ordering bucket seat foam next

 

[56f100bbw]

New chrome rings

Got my chrome work back today headlight rings look great are the older style without the four holes plus their original not China like my old ones were

 

[Howard2x4x4]

Saved myself $75. That's the price of store-bought dispenser gun for the two part adhesives that require a mixing tip. I made my own using pvc water pipe fittings. Worked great! Now I can put together some of the multitude of stuff I cut apart.

 

[sprdv1]

Every little bit counts.....

Saved myself $75. That's the price of store-bought dispenser gun for the two part adhesives that require a mixing tip. I made my own using pvc water pipe fittings. Worked great! Now I can put together some of the multitude of stuff I cut apart.

 

[svastano]

Pressure tested the cooling system to find my leak. Found out it was the bottom hose coming of the water pump. Was driving me crazy. I could not see where it was coming from until I used the pressure tester I rented at the local auto parts store. It is a good deal at advanced auto. Pay for the unit, when you come back you get a full refund.