What have you done to your Bronco today?

[blamejane]

Last day of High School tradition, my grandson always gets to drive the bronco to school. He and his best friend took pics with the trucks at the local campground. That's a 71 Blazer along with my 76 Bronco; which my gs hopes to inherit someday.

 

[DirtDonk]

Old trucks being used the way they’re supposed to! In the best of family traditions!

 

[gnsteam]

Parts starting to return home with fresh paint. Picked up the Duff tire carrier today.

 

[Howard2x4x4]

Parts starting to return home with fresh paint. Picked up the Duff tire carrier today.

Diggin' on the Mini Me!

 

[hsach]

Haven't done much work on the '67 lately, but decided to switch the tires around on my broncos. It will be a while before the '67 drives under its own power, so I wanted to make sure the 32x11.5 tires were balanced properly. The '78 has 33x12.5.

I'll drive it this way for a little while then switch back, so far it seems the 32's are better balanced than my 33's. I also forgot how much stronger the brakes feel with a smaller tire.

 

[joebronco73]

Getting ready to fix a manifold leak, so naturally, I wanted to replace the old Holley valve covers with some second-hand Scott Drake Bronco script covers. Just got delivered yesterday, so now I'm cleaning them up:

 

[Lewko66u13]

Couple things over the past few weeks

Transfercase dash sticker on our 66 roadster



And new radius arm bushings on our 74 bronco

 

[sprdv1]

Last day of High School tradition, my grandson always gets to drive the bronco to school. He and his best friend took pics with the trucks at the local campground. That's a 71 Blazer along with my 76 Bronco; which my gs hopes to inherit someday.

Love it.. good job mom

 

[sprdv1]

Parts starting to return home with fresh paint. Picked up the Duff tire carrier today.

color and match, Set. lol Nice

 

[sprdv1]

Haven't done much work on the '67 lately, but decided to switch the tires around on my broncos. It will be a while before the '67 drives under its own power, so I wanted to make sure the 32x11.5 tires were balanced properly. The '78 has 33x12.5.

I'll drive it this way for a little while then switch back, so far it seems the 32's are better balanced than my 33's. I also forgot how much stronger the brakes feel with a smaller tire.
View attachment 925858 View attachment 925859

Nice set you got there..

 

[Speedrdr]

No pics yet, but I’m in the process of replacing body mounts. I’m just gonna say that it’s gonna be a happy day when I get DONE with this job and can get back to normal Bronco restoration…if there’s even such a thing as normal. Lol

Randy

 

[Yeller]

Pushed a jeep on the trailer

 

[1969]

New Dennis carpenter tail light buckets, and ‘66 lenses. Just forgot to get those pesky unique screws..

 

[mrdrnac]

Just finished making my Stinger/Brush Guard for my Bronco.
Thanks to Mike at Extreme Custom Fabrication for the pre-bent Stinger bar!

Extreme Custom Fabrication

Featured Items News

extremecustomparts.com

 

[Soylent]

Installed Solo Motosports latch. No more creaking or popping open like the old bent one.

 

[399strokerEB]

Swapping out my rear shocks and shock mounts. I was hoping the bent shocks were what was causing my lean but it didn't fix anything.

 

[joebronco73]

Pulled the intake manifold, cleaned up the gasket face on the heads, and started cleanup on the manifold...hoping to have it back together this week.

 

[phred]

Took it out for a drive and surprise surprise the gas guage has quite working. Guess I’ll pull the sender tomorrow and test it.

 

[fluffybunny]

Upgraded my original alternator to a 100 amp GM/Delco in a Ford case alternator. Since I have a Sniper, I was tired of looking at the yellow light on amps while sitting idle.

 

[tasker]

walked by it this morning...that's about all