• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JB Fab

    New door skin sucks!

    The reproduction skins can be a real bitch to get to fit right. Is that already painted???
  2. JB Fab

    roll cage doesn't fit

    Yes, I've 'built to fit' several cages, upon installation (after powder coating) there were fitment issues that required ratchet straps to pull the sides in. My understanding is that it is more of an issue with ERW than DOM.
  3. JB Fab

    D20 Transfer Case Rebuild

    Yes sir! We have new pills $7 if you need one? Jon
  4. JB Fab

    j shift dana 20 rebuild.

    The "pill" is the interlock between the shift-rails, looks like a long capsule ..
  5. JB Fab

    Sector shaft fell out!!!

    Been there, twice..... My issue was a fractured sector shaft due to the steering stops on the knuckles not being adjusted correctly. DO NOT re-use that sector shaft unless you have it magnafluxed first. The cracks can be impossible to see.
  6. JB Fab

    j shift dana 20 rebuild.

    Add shims until you have endplay, then reduce the shim-stack until you have .001 to slight pre-load (new bearings). if you put a whole set of shims in and still don't have endplay something is wrong.
  7. JB Fab

    Dana 20 Gear Play

    Quite possibly..... If the gear was not correctly engaged the sliding gear or sliding back/forth I would expect there to be some sort of noise.
  8. JB Fab

    Dana 20 Gear Play

    Quite possibly.....
  9. JB Fab

    Dana 20 Gear Play

    That Teralow kit was for a Jeep.... The Jeep D20 application uses a nut to retain the input gear, so it needs more room. Just machine a spacer to take up the slack (between the gear and snap-ring). My wife's 67' has a had a homemade spacer for about 15 years.......
  10. JB Fab

    j shift dana 20 rebuild.

    We do have brand new pills available to folks wanting to upgrade to the "T" type rails... Cheers, Jon
  11. JB Fab

    WH / AA Extreme Duty Dana 20 Output System?

    Thanks for posting a picture the finished assembly. Note: The excessive endplay in the output typically creates a situation where you will pop into neutral from rear wheel high. That can cause gear damage when it pops out.
  12. JB Fab

    starter drive will not disengage when the engine starts

    I had this problem once (cost two starters)..... The start wire was run in the same wire loom as the charge wire from the the alternator, This caused 1.5v inductance, which was just enough to keep the solenoid energized after the key was tuned to 'run'.
  13. JB Fab

    Flush mount windshield?

    Search for 'glue in windshield'
  14. JB Fab

    Transfer case oil recommendation?

    Way better than using gearlube, plus it has lots of zinc (yellow metal friendly wear additive)
  15. JB Fab

    Transfer case oil recommendation?

    If you use a motor oil it should be non-detergent. Most motor oils now days is detergent, meaning is has surfactants that keep contaminants suspended so they can be filtered out in a pressurized lubrication system that has a filter. Non-detergent allows the contaminants to precipitate out and...
  16. JB Fab

    Oil in Cylinders

    Doublecheck the torque on the intake bolts, I've had oil get pulled into the runners from a bad seal at the manifold gasket. A bad enough seal will also cause a noticeable symptom of a vacuum leak. If the heads/block were machined, was the fit of the intake confirmed/corrected?
  17. JB Fab

    Winters Shifter for 6R80

    Rory at Radesigns is great to deal with, and makes great products. Being a small business owner/manufacturer he actually works with his customers, its not like dealing with the 'customer service' of a huge company or giant re-seller. His VX shifter Is made in the USA, and has adjustable gates...
  18. JB Fab

    Welding winshield frame directly to cowl

    Make sure you can get your roll bar in too..... Ooops!
  19. JB Fab

    Aftermarket door latches

    I had problems with the latches from multiple sources. Until I tried Dennis Carpenter, now they are the only ones I will use....
  20. JB Fab

    ZF tranny install with J shift t case question on capatability.

    In stock and ready to ship, also stocked at most of the Bronco houses. Part number EB20J T-2
Top