What have you done to your Bronco today?

[broncodrew]

got primer on all the parts;D now will be sanding and maybe by end of day paint will be put on!

 

[rbodine]

Well I spent all day yesterday removing the Dana 30 and started installing the disc brake Dana44. Man it is a ton of work by yourself, crawling around on the driveway! But the End result will be all worth it. Hoping to finish today.

 

[hdfx81]

Added some side marker lights. Used ones from 68 Plymouth B-body instead of the stock bronco ones.

 

[GraficO]

learned that trying to solder a wiring harness in 40 degree weather is next to impossible

 

[orangecrush4u]

Didnt do anything to mine but worked on anothers;D

 

[Ethansdad73]

made 125 in one hour

spent an hour getting the window frame off the door that Bax gave me was actually easier than i thought...one more to go... should be a bit easier since its already busted.


just jinxed myself didnt I!

 

[Skiddy]

charged battery, added antifreeze and now getting ready put the blankey on it for the winter

 

[Pops]

Ground off the old rusty rear shock mounts, Loosend all the leaf spring bolts
so when time comes to fit the new 11 pack deavers it goes smoother.

 

[Tito]

Dragged home a 74 today! Well frame/title/glove box/VIN. It will be the base for the 4 door project. Also got a stock hood for the uncut. Looks like I need to add a half inch body lift.

 

[Ethansdad73]

rear bumper off, check. rear tire carrier off, check. painted over rust on bumper,check. removed cable strap left over from tire carrier, check, removed carpet hold down strip to expose body mount bolts, check removde window frame to replace broken one with, check. cleaned driveway of dirt left behind from working on bronco, check... 2 ice cold mtn dews, priceless

body lift tomorrow, suspension lift the next 2 days after that... finally

 

[BluebroncoNC]

Sanded on the bottom of the windshield frame, top of the Cowl, Found more FREAKIN rust, under primer and por-15.... must have done that section while half a sleep.... Had to run to painter and tell him, thur. rather than tue for spray booth... #@$@ .... !@#$... @#$%

 

[teamsideways]

sunday i installed a msd 6a,ford magnetic pick up dist,msd coil,new fuel pump,bolted down the rear seat,and took the carb off and on about 20 times tring to get trash out of it.

 

[73stallion]

installed my new roller rocker arms and valve covers

 

[sprdv1]

installed my new roller rocker arms and valve covers

Looks sweet man!

 

[W650Mike]

installed my new roller rocker arms and valve covers

Looking Good! I like your plug wire routing.


Installed wiper conversion and tested with glass cleaner. Sweet.

 

[Justafordguy]

Installed wiper conversion and tested with glass cleaner. Sweet.

What conversion did you use? My stock wipers suck.

 

[NY-Bronco]

Got the motor back in the bay WOOHOOO!!;D

 

[Heus33]

Got the motor back in the bay WOOHOOO!!;D

That thing is more art than motor! yowza!

 

[matt w]

SADLY!!!....

...................I put my hard top on today! ;D;D

 

[Ethansdad73]

bodylift day>>>