Search results

Has anybody installed Duff's headers and dual exhaust system? The drivers side header points down at a slight angle and the pipes they sent don't seem to have the right amount of bend to have a straight shot to the mufflers. Anyone have the same problem? Thanks - Paul

I understand flow master makes a new one called Hushpower II. Its suppose to be more compact and run much cooler than the others, anybody have them? Paul

I'm in on this too, I'll need tank and accessories but not in a hurray. I will get my deposit to you. Yhanks - Paul

I have had the same problem with the discharge hoses, I tried heating them with a hair drier and they still don't fit. I noticed the high spots on the inside of the vents but if you put the hoses on the inside it crushes them to reduce air flow. One of the pressure hoses they sent me was wrong...

Hey Minky, I know the feeling, I'm in the same place when I talked to you last. I hav'nt even started on the wiring yet because none of the brackets they sent me fit. I'm waiting for Chuck to finish the brackets for the 351W. He sent me a set to help me out but they were for a 302,( not his...

Thanks everyone, sounds like the way to go is with the cable. Paul

I don't mind spending the bucks as long as I know which way to throw it. I'm for whatever works best, within reason. I know the stock linkage looks close to the valve covers but was'nt sure if there was any binding. Thanks again - Paul

For those of you that are running a 351W with a carb. did you have to modify the height of the linkage? I noticed that Duff sells a new bellcrank for 50 bucks that raises the linkage because of the taller heads. Is it neccessary for the proper operation of the throttle or have you done something...

I don't seem to have very good luck with the Goodyear tires. they always have uneven tire wear, even on my new vehicles I buy. I thought it was the Ford front ends but if I switch to a Michelin they run perfect. I would stick with an LT tire Paul

Edelbrock use to make a nice dropdown air cleaner that positioned a filter on each side of the carb. Nice looking setup but I hav'nt seen them in a while. Not cheap either. Paul

I also bought the dual kit from Duff's but hav'nt done the install yet, hopefully real soon. Paul

Thanks Chuck! Will be looking out for it. Paul

I have Duff's long tube headers, the fit is good but install on passenger side with the AOD is tight. Paul

I got mine tonight, I did'nt need it right away but it was worth the wait, top quality. Thanks Ryan Paul

Ha, no its not blood on the rag, just paint. But like all EB owners I have given my share of blood for my sport. Paul

Ryan, I can wait on mine , give to those first that really need it. Paul

Same here, I'm going to wait for the compressor brackets before I go any further. Its not like I have nothing else to do. When you can lets see some pictures of that roll cage, sounds like it came out great. Paul

Bill, here is a pic of the hole I used for the evap. through the firewall. If this is'nt what you wanted let me know and I'll take another,this digital film is cheap. Paul

Madgyver, hope this pic will help some, I still have to fasten to head or cover. It comes up between 6 and 7 and is close to booster but does clear. If you need another pic I can get another angle. Paul

So does anyone make a replacement dome light that goes in the wiper cover? The lens cover on mine is about shot. Paul